High/Low Beams
Thread Starter
Heel & Toe
Joined: Nov 2012
Posts: 20
Likes: 0
From: Tacoma WA
High/Low Beams
Okay, so I took by steering column apart to change the directional switch and my dimmer switch also needs to be replaced. Fortunately the arm is good to go but I could see where the plastic part of the dimmer switch was broken. To get to that I'm assuming the three screws holding the ignition and everything else in place needs to come out. Now, if I do take that out will I encounter ignition issues? I can live without high beams for a bit if that's the case. Any advice on this matter?
Thank you in advance to everyone! You all have been a great help with a couple of other matters I encountered so far.
Thank you in advance to everyone! You all have been a great help with a couple of other matters I encountered so far.
