T56 slave cylinder bracket pics needed
Thread Starter
Intermediate
Joined: Feb 2013
Posts: 32
Likes: 0
T56 slave cylinder bracket pics needed
I have a 93 firebird lt1 t56 I'm trying to install in my automatic vette so I'm trying to figure out where exactly to make the hole threw the firewall were the slave cylinder won't hit the brake booster and the hydraulic hose in between the slave and master cylinder seems to short to make it to we're it should be so if anyone can post pics of there installs and what they did it would be very appreciated also pics of there slave cylinder brackets thanks in advance
Drifting
Joined: May 2005
Posts: 1,968
Likes: 44
From: East TN
http://forums.corvetteforum.com/c3-t...gs-list-7.html
Here's mine. Picture on post #83 for the clutch master.
Here's mine. Picture on post #83 for the clutch master.
Burning Brakes
Joined: Oct 2008
Posts: 955
Likes: 50
From: Jersey Shore
Crappy picture, but here is an '85 1Ton Chevy pickup clutch master using the factory clutch rod hole. All you have to do is drill the two bolt holes. if you look under the dash, the metal support behind the fiberglass should have the hole already cut out.
