White Performance 383 Dart Block Engine
Thread Starter
Intermediate
Joined: Jul 2012
Posts: 33
Likes: 0
From: Tomball Texas
White Performance 383 Dart Block Engine
Gents and Ladies,
I have a 1978 Vet and I have been restoring to a running condition.
The engine is now running but it is stock except for the Edelbrock Performer Intake and Headers. I have looked as all of the different ways to make a great reliable 450+ HP engine. White Performance in Tenn has a new Dart Block, Steel crank, roller cam & rockers, Forged Pistons and rods to name the major items for $4,795.
They are about to finish their own Dyno Stand and for $600 they will use my carb, my intake, my MSD Distribitor with wires and I have asked to witness the Dyno.
Has anyone used them or purchased this 383 Dart Engine assembly?
Looking for advise and comments.
Regards,
Rick from Tomball TX
I have a 1978 Vet and I have been restoring to a running condition.
The engine is now running but it is stock except for the Edelbrock Performer Intake and Headers. I have looked as all of the different ways to make a great reliable 450+ HP engine. White Performance in Tenn has a new Dart Block, Steel crank, roller cam & rockers, Forged Pistons and rods to name the major items for $4,795.
They are about to finish their own Dyno Stand and for $600 they will use my carb, my intake, my MSD Distribitor with wires and I have asked to witness the Dyno.
Has anyone used them or purchased this 383 Dart Engine assembly?
Looking for advise and comments.
Regards,
Rick from Tomball TX
Thread Starter
Intermediate
Joined: Jul 2012
Posts: 33
Likes: 0
From: Tomball Texas
Le Mans Master
Joined: Oct 2006
Posts: 7,123
Likes: 433
From: Gladstone MO
C3 of Year Finalist (appearance mods) 2019
Burning Brakes
Joined: Sep 2011
Posts: 896
Likes: 7
I would be leery of any engine that doesn't mention the brand of rotating assembly, heads, etc. Lots of engine builders are carrying a cheaper line of crate motors with secret stuff inside an SHP block. I suspect Chicom components, lol.
Safety Car
Joined: Jan 2009
Posts: 3,736
Likes: 56
From: anchorage ak
I believe his username is pauldanna could be pauldana. The sold him one rotating assembly and sent another. I think it all got worked out though. Like others have said be sure what you get is what you wanted. If you do an internet search I think you might reconsider.
Drifting
Joined: Aug 2004
Posts: 1,883
Likes: 124
From: Lubbock TX
Do you know how to tell when your kids are lying to you?
Too much detail in the story.
Look at some of Skip's ads - too much BS in the story, not much detail (ProComp cranks, rods, heads).
Also note how they run down "others that use XXX". No good builder needs to run down others on the market, they simply let their quality stand on its own.
Do yourself a favor and do searches on several performance forums.
Too much detail in the story.
Look at some of Skip's ads - too much BS in the story, not much detail (ProComp cranks, rods, heads).
Also note how they run down "others that use XXX". No good builder needs to run down others on the market, they simply let their quality stand on its own.
Do yourself a favor and do searches on several performance forums.
Last edited by L88Plus; Oct 3, 2013 at 08:00 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Intermediate
Joined: Jul 2012
Posts: 33
Likes: 0
From: Tomball Texas
Here is the link: http://www.ebay.com/itm/ws/eBayISAPI...category=33615
Thread Starter
Intermediate
Joined: Jul 2012
Posts: 33
Likes: 0
From: Tomball Texas
I have done some checking and am planning to visit them in person and to witness the test on the Dyno.
They machine their own aluminum heads that I was told were cast in Down Under Country not China. There oil pan I believe comes from China. The block is a new Dart, Scat, Prob, etc. I have to admit it is cheaper than I can buy and build it myself.
Has anyone out there bought one of these Dart Block 383 from them?
RickH from Tomball
They machine their own aluminum heads that I was told were cast in Down Under Country not China. There oil pan I believe comes from China. The block is a new Dart, Scat, Prob, etc. I have to admit it is cheaper than I can buy and build it myself.
Has anyone out there bought one of these Dart Block 383 from them?
RickH from Tomball
Thread Starter
Intermediate
Joined: Jul 2012
Posts: 33
Likes: 0
From: Tomball Texas
That is what I was thinking but if the castings are of correct alloy and they machine the castings in house, will they perform on the Dyno seems the real issue.
I would prefer Dart Heads or another USA brand.
RickH Tomball
I would prefer Dart Heads or another USA brand.
RickH Tomball
Drifting
Joined: Oct 2012
Posts: 1,524
Likes: 61
From: Medina Ohio
Remember Skip White and WHite Performance are two different shops down the road from each other. One is SKip and the other I believe is his nephew. Completely different operations, however similar builds/parts, etc.
My buddy recently got a 505 BB from Skip. Overall good, but when he got it they didn't paint the oil pan black like he requested, it was orange. The distributor wasn't installed as they said it was going to be, and it ended up being bad. They sent the wrong valve covers, then gave him a hassle to get the right ones in a timely manner. Lastly, the paperwork only had 1 run checklist completed where they advertise the motor is ran at least twice. The second column was not completed.
He said they were awesome and helpful during the ordering process, but when trying to resolve those issues after delivery they were complete ***holes, calling him a damn yankee, and hanging up on him. He's currently in a credit card dispute with them.
Two different sites;
http://www.skipwhiteperformance.com/
http://www.whiteperformance.com/
So, motor is good so far, less then 1000mi, but customer service is in the dumps.
My buddy recently got a 505 BB from Skip. Overall good, but when he got it they didn't paint the oil pan black like he requested, it was orange. The distributor wasn't installed as they said it was going to be, and it ended up being bad. They sent the wrong valve covers, then gave him a hassle to get the right ones in a timely manner. Lastly, the paperwork only had 1 run checklist completed where they advertise the motor is ran at least twice. The second column was not completed.
He said they were awesome and helpful during the ordering process, but when trying to resolve those issues after delivery they were complete ***holes, calling him a damn yankee, and hanging up on him. He's currently in a credit card dispute with them.
Two different sites;
http://www.skipwhiteperformance.com/
http://www.whiteperformance.com/
So, motor is good so far, less then 1000mi, but customer service is in the dumps.
Last edited by Ibanez540r; Oct 3, 2013 at 10:56 AM.
