PAINLESS Wiring Harness. How Difficult?
Burning Brakes
Joined: Oct 2013
Posts: 1,216
Likes: 66
From: Killeen Texas
The EZ will not match the hole in the firewall, you also do not get a complete list on the wiring in the harness as you do with the painless. Have not installed a EZ but did purchase one for the 73. Tried to get a listing of all the circuits from them and they refused. I sent it back as I have used painless in the past. I was trying to save a little money.
Drifting
Joined: Jun 2012
Posts: 1,990
Likes: 183
From: Port St. Lucie Fl
The EZ will not match the hole in the firewall, you also do not get a complete list on the wiring in the harness as you do with the painless. Have not installed a EZ but did purchase one for the 73. Tried to get a listing of all the circuits from them and they refused. I sent it back as I have used painless in the past. I was trying to save a little money.
Le Mans Master
Joined: Oct 2002
Posts: 7,098
Likes: 378
From: Las Vegas - Just stop perpetuating myths please.
For the eng compartment i just used a OEM replacement like from lectric limited. All it took was removed one side of firewall harness from the terminal block at a time and plug in the replacement. There was plenty of grease left in the block so i didnt add any. Then swapped each sensor terminal connector one at a time. Drivers side is easier as p-side has the starter which is difficult to access. FYI the A/C harness is an add-on to the p-side harness.
My console harness was in great shape because its under the dash and protected from UV. No need to replace my console harness.
Hope this helps,
cardo0
My console harness was in great shape because its under the dash and protected from UV. No need to replace my console harness.
Hope this helps,
cardo0
