SS sleve
Thread Starter
Safety Car
Joined: Sep 2005
Posts: 4,229
Likes: 643
From: Orange County Ca
SS sleve
Looks like my replacement master cylinder is starting to go bad. The brake pedal will slowly bleed down. I would like to replace it with what I believe is the origional master, which has the bleeder valves on it, unlike most replacements, just to keep the car as origional as possible. Been sitting in my gararge for 15 yrs.
So, anyone know where to get the pitted bore ss sleeved in the Los Angeles, Long Beach or Orange County, Ca. area?
So, anyone know where to get the pitted bore ss sleeved in the Los Angeles, Long Beach or Orange County, Ca. area?
Burning Brakes
Joined: Sep 2009
Posts: 1,124
Likes: 140
From: Western New York
Take a look in Hemmings Motor News. There are always ads in there for sleeving master cylinders. You'll probably have to pack and ship it, though, as there aren't many places that do the masters. Most just do the calipers.
Duane
Duane
Team Owner
Joined: Sep 2006
Posts: 31,301
Likes: 4,390
From: Westminster Maryland
Hi Sf,
I'd recommend sending your master cylinder to Richard Fortier.
He's in Fenton Michigan, but once the m/s is in a box it doesn't know how far it's traveling.
810-750-1472
Regards,
Alan
I'd recommend sending your master cylinder to Richard Fortier.
He's in Fenton Michigan, but once the m/s is in a box it doesn't know how far it's traveling.
810-750-1472
Regards,
Alan
Race Director
Joined: Mar 2006
Posts: 14,112
Likes: 28
From: Florida
Melting Slicks
Joined: Nov 2010
Posts: 3,363
Likes: 32
From: Bowtie, Pennsyltucky
St. Jude Donor '13-'14-'15,'21
Why not ship it and have it done by someone familiar with the process that comes highly recommended? I would, rather than someone local saying "oops, sorry I ruined your original m/c". 
