Reverse light question.
Drifting
Joined: Oct 2000
Posts: 1,825
Likes: 56
From: Shawano WI
Re: Reverse light question. (QuickVet)
Check and clean the ground wire at the end of the left frame rail. If it is coroded and not making a good connection then the current from one circuit will try to use the other circuit as a ground causing both to light up.
Drifting
Joined: Oct 2000
Posts: 1,825
Likes: 56
From: Shawano WI
Re: Reverse light question. (QuickVet)
Looking at the wiring diagram the only thing those 2 circuits have in common it the ground. If cleaning the ground did not help I would replace all 6 bulbs (2 tail light, 2 front turn signal, 2 back-up lights). Many times the two elements of the bulbs touch togather with vibration and cause all kinds of weird problems. That is easy and inexpensive to do. Tail lights and turn signal will be 1157 bulbs, Back-up lights will be 1156 bulbs.
If that does not solve the problem you have a wiring problem. Change the bulbs first and let us know if it is cured. If not I can go over some wiring with you.
If that does not solve the problem you have a wiring problem. Change the bulbs first and let us know if it is cured. If not I can go over some wiring with you.
