alumimum radiator support
Melting Slicks
Joined: Jun 2011
Posts: 3,116
Likes: 598
Bought a dewitts direct replacement for my 1978 and used all the orginal hardware. Are you missing pieces ?
Safety Car
Joined: Apr 2006
Posts: 4,057
Likes: 421
From: BC
I then called Tom at Dewitts which is what I should have done in the first place.
Last edited by CanadaGrant; Mar 1, 2014 at 10:49 PM.
Thread Starter
Advanced
Joined: Jun 2010
Posts: 82
Likes: 0
champion radiator
Ah man... Did you buy a fleabay Champion with square sholders that don't fit? They told me I had to cut my rad support in my original 69/427 to make it fit but only after I bought it and it was delivered....
I then called Tom at Dewitts which is what I should have done in the first place.
I then called Tom at Dewitts which is what I should have done in the first place.
Le Mans Master
Joined: Oct 2010
Posts: 6,937
Likes: 848
From: melbourne florida
2023 C3 of the Year Finalist - Modified
my champion fit fine, i did put a split piece of rubber hose on the top clamp and haven't had an issue. i know people with be cool and dewitts and both had to make some adjustments. send it back if you don't like it.
