C3 interior parts recommendations, please...
Thread Starter
Advanced
Joined: Jun 2014
Posts: 75
Likes: 0
From: Harrisville RI
C3 interior parts recommendations, please...
Hey Guys,
My red cloth interior is faded and worn. I want to upgrade it to red leather from Corvette America, which is Made in USA.
I'm also going to replace the interior pieces. Does anyone have any experience with their products?
Thanks!
- Bryan
My red cloth interior is faded and worn. I want to upgrade it to red leather from Corvette America, which is Made in USA.
I'm also going to replace the interior pieces. Does anyone have any experience with their products?
Thanks!
- Bryan
Racer
Joined: Jan 2014
Posts: 334
Likes: 6
Many people (including me) have experience with their products since they supply a lot of the other vendors. Often when I order from another company the box will say Corvette America on the side of it. No issues so far.
Drifting
Joined: Dec 2012
Posts: 1,360
Likes: 59
From: Meldrim Georgia
I've got their seats. They look and feel really good. I ordered mine from Wilcox.
He runs specials all the time here's a link.
https://www.corvetteforum.com/c3-tec...offer-too.html
He runs specials all the time here's a link.
https://www.corvetteforum.com/c3-tec...offer-too.html
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,853
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
I've got their seats. They look and feel really good. I ordered mine from Wilcox.
He runs specials all the time here's a link.
https://www.corvetteforum.com/c3-tec...offer-too.html
He runs specials all the time here's a link.
https://www.corvetteforum.com/c3-tec...offer-too.html
Last edited by Willcox Corvette; Jun 27, 2014 at 03:16 PM.
Thread Starter
Advanced
Joined: Jun 2014
Posts: 75
Likes: 0
From: Harrisville RI
Thank you so much for all the replies.
I decided to order the rubber moldings set for the t-tops, doors, etc to install before I do anything to the interior. I've only had the car for a week, and my list of things I want to do keeps growing exponentially.
Yesterday, I pulled a number at the registry of motor vehicles, then left to go to a boneyard to pick up a corvette jack and a 5th aluminum wheel to use as a spare until my donut arrives. I went back to the registry and still had a two hour wait. Rhode Island taxed the car as being worth $11,500, even though it is not worth even close to that amount.
My wife asked me how many car shows I've taken the vette to so far?...3 shows in a 6 day period...haha...but who's counting?!?
By the way...Is it okay to polish the aluminum wheels with Mother's Mag and Aluminum Polish?
I decided to order the rubber moldings set for the t-tops, doors, etc to install before I do anything to the interior. I've only had the car for a week, and my list of things I want to do keeps growing exponentially.
Yesterday, I pulled a number at the registry of motor vehicles, then left to go to a boneyard to pick up a corvette jack and a 5th aluminum wheel to use as a spare until my donut arrives. I went back to the registry and still had a two hour wait. Rhode Island taxed the car as being worth $11,500, even though it is not worth even close to that amount.
My wife asked me how many car shows I've taken the vette to so far?...3 shows in a 6 day period...haha...but who's counting?!?
By the way...Is it okay to polish the aluminum wheels with Mother's Mag and Aluminum Polish?
Last edited by Tahlee; Jun 28, 2014 at 07:39 AM.
Racer
Joined: Nov 2008
Posts: 442
Likes: 6
From: jacksonville Florida
Thank you so much for all the replies.
I decided to order the rubber moldings set for the t-tops, doors, etc to install before I do anything to the interior. I've only had the car for a week, and my list of things I want to do keeps growing exponentially.
Yesterday, I pulled a number at the registry of motor vehicles, then left to go to a boneyard to pick up a corvette jack and a 5th aluminum wheel to use as a spare until my donut arrives. I went back to the registry and still had a two hour wait. Rhode Island taxed the car as being worth $11,500, even though it is not worth even close to that amount.
My wife asked me how many car shows I've taken the vette to so far?...3 shows in a 6 day period...haha...but who's counting?!?
By the way...Is it okay to polish the aluminum wheels with Mother's Mag and Aluminum Polish?
I decided to order the rubber moldings set for the t-tops, doors, etc to install before I do anything to the interior. I've only had the car for a week, and my list of things I want to do keeps growing exponentially.
Yesterday, I pulled a number at the registry of motor vehicles, then left to go to a boneyard to pick up a corvette jack and a 5th aluminum wheel to use as a spare until my donut arrives. I went back to the registry and still had a two hour wait. Rhode Island taxed the car as being worth $11,500, even though it is not worth even close to that amount.
My wife asked me how many car shows I've taken the vette to so far?...3 shows in a 6 day period...haha...but who's counting?!?
By the way...Is it okay to polish the aluminum wheels with Mother's Mag and Aluminum Polish?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski