thanks
Thread Starter
5th Gear
Joined: Dec 2012
Posts: 5
Likes: 0
thanks
I got an email from Lars "better start looking for another carb" on Jan 10th. On Jan 12th I started my search. Saw some on eBay but not good feedback and pricey. I was already $200 in hole from first rebuild. Searched my current forums, El camino Chevelle with no luck.
I remembered I was a member here so came to look around. I almost fell off the chair when in the classified here and I see the almost exact part number I need except one letter. But wait a minute the picture shows a different number than the ad, the Picture is the EXACT match. after some emails with GO VETTE GO John he just send that carb directly to Lars to save me some shipping. So on the 13th John sends the carb to Lars. He gets it Friday 16th. Has it up and running Saturday 17th morning on his test engine for testing. I meet up with Lars at 4PM the 17th. I wake up the 18th and install the carb. Attach the battery cable. pump throttle about 5-6 times. I have no interior in the car as I am doing the carpet but I just reach in and turn the key and VROOM.
lars was able to reuse some of the parts from my previous failed rebuild from a commercial place and saved me $50 from the usual price. used the best of the 2 to create one.
SO in a weeks time I went from
to 
BIG THANKS TO LARS and JOHN - GO VETTE GO
I remembered I was a member here so came to look around. I almost fell off the chair when in the classified here and I see the almost exact part number I need except one letter. But wait a minute the picture shows a different number than the ad, the Picture is the EXACT match. after some emails with GO VETTE GO John he just send that carb directly to Lars to save me some shipping. So on the 13th John sends the carb to Lars. He gets it Friday 16th. Has it up and running Saturday 17th morning on his test engine for testing. I meet up with Lars at 4PM the 17th. I wake up the 18th and install the carb. Attach the battery cable. pump throttle about 5-6 times. I have no interior in the car as I am doing the carpet but I just reach in and turn the key and VROOM.
lars was able to reuse some of the parts from my previous failed rebuild from a commercial place and saved me $50 from the usual price. used the best of the 2 to create one.
SO in a weeks time I went from
to BIG THANKS TO LARS and JOHN - GO VETTE GO
Last edited by robpp; Jan 22, 2015 at 01:20 PM.
Top notch.
Le Mans Master
Joined: Mar 2001
Posts: 5,738
Likes: 644
From: Lincoln, CA
All from a guy who goes it for fun. I bought a new carb from Summit and had it dropped shipped. Felt good knowing he looked everything over and found a few things.
The secondary accel pump adjustment was slack and did not produce instant pump shot
Mixtures were set very rich (12.2:1)
Float bowl fuel levels were high - the primary side was very high
Idle speed was high
On the other side, the primary/secondary idle speed split was right on the money, which is unusual. The mixtures, although very rich, were all evenly set. All hardware was tight, and there were no fuel leaks.
Mixtures set at a perfect 14.2:1. This works very well with current pump gas, and produces great throttle response. Idle mixture screws are set at 3/4 turn out:
Couldn't ask for anything more.
The secondary accel pump adjustment was slack and did not produce instant pump shot
Mixtures were set very rich (12.2:1)
Float bowl fuel levels were high - the primary side was very high
Idle speed was high
On the other side, the primary/secondary idle speed split was right on the money, which is unusual. The mixtures, although very rich, were all evenly set. All hardware was tight, and there were no fuel leaks.
Mixtures set at a perfect 14.2:1. This works very well with current pump gas, and produces great throttle response. Idle mixture screws are set at 3/4 turn out:
Couldn't ask for anything more.
Melting Slicks
Joined: Dec 2000
Posts: 3,363
Likes: 303
From: Lansdale 19446 PA
2024 C3 of the Year Finalist- Unmodified
St. Jude Donor '10-'11, '15, '19
That is fantastic news Rob!! Glad it all worked out!! The timing of all this is unreal!! That carb had been sitting here for a couple years when I decided to clean up and post it on CF!!!
Now get out there and Drive!!!!!
John
Now get out there and Drive!!!!!
John
