Sway bar installation - 75
Thread Starter
Advanced
Joined: Nov 2012
Posts: 70
Likes: 0
From: Franksville WI
Sway bar installation - 75
My latest no I'm not a mechanic question. Just ordered a gymkhana front sway bar. Looks pretty straight forward to change out. My question is verifying that all I need to do is put the car up on jack stands and just do the replacement, right? Or do I need to do something else to release tension on the front end.
As always thanks for all the forum support.
As always thanks for all the forum support.
Race Director
Joined: Apr 2009
Posts: 19,294
Likes: 2,754
From: Charlotte NC
I prefer to do it with it on the ground an not up on stands ESPECIALLY WHEN you go to install the end link bolts and rubber cushions.
I have ramps that I have made that allows me to drive the car up on them easily and slide under the car and have at it.
DUB
I have ramps that I have made that allows me to drive the car up on them easily and slide under the car and have at it.
DUB
Thread Starter
Advanced
Joined: Nov 2012
Posts: 70
Likes: 0
From: Franksville WI
Thanks, wasn't sure if there were some other tensions involved. Didn't want something to snap back at me.
Race Director
Joined: Apr 2009
Posts: 19,294
Likes: 2,754
From: Charlotte NC
DUB
Team Owner
Joined: May 2001
Posts: 87,357
Likes: 1,592
From: Western NY
