When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i have an 82 whos mufflers are on their last legs. i was just going to go ahead and order myself a pair of 2chamber flows but im curious to know how they look?
do any of you with flows have a photo. they dont look out of place or odd do they? are they more or less the same dimentions as the stock muffler?
also, any exuast suggestions or comments are greatly appreciated.
I have Deltaflow 50's on my CE. They are longer and thicker than stock. Real hard to tuck them up there. You will also have to get new turndowns made. I think you can see them hinging low in my sig pic, and they are as high as I could get them
I have the Flowmaster Delta 50's, which were installed with no problem. They do hang a little lower. This link has various pictures as well as a sound clip. http://home.attbi.com/~jchadwick/exhaust.htm
The 40 series are smaller and will fit better with 2.5" pipe but the are loud and create internal resonance. The 50 series are bigger and it would be tough to fit them with 2.5" pipe. You could use 2.25" pipe and the 50's may work. Get the H pipe to increase performance and reduce that raspy sound.
I have the 50 series and they tuck up better than the stock mufflers. It all depends on who installs them. I have seen some pretty lousy jobs and some real good ones. The 50s will fit almost horizontal to the ground if the pipes are bent right.
I have the 50 series and they tuck up better than the stock mufflers. It all depends on who installs them. I have seen some pretty lousy jobs and some real good ones. The 50s will fit almost horizontal to the ground if the pipes are bent right.
Yea but we got a little more material back there then him. ;)