New Engine
Thread Starter
Advanced
Joined: Apr 2009
Posts: 78
Likes: 4
From: Baytown Tx
New Engine
I installed a new crate motor and when I let it run for about 15 minutes the motor will cut out and die on its own. The temperature seems to hang at 180f and doesn't seem to overheat. Is there something that could be getting hot and shutting it down?
Safety Car
Joined: Jan 2009
Posts: 3,736
Likes: 56
From: anchorage ak
Like 60b I also think that it's probably spark related, will it restart or do you have wait for it to cool down, sounds like a coil or ignition module when it warms it expands and opens a Crack, I'd had this happen once with a non vette, which turned out to be the coil.
Dr. Detroit
Joined: Mar 2012
Posts: 10,095
Likes: 4,021
From: New Braunfels Texas
Like 60b I also think that it's probably spark related, will it restart or do you have wait for it to cool down, sounds like a coil or ignition module when it warms it expands and opens a Crack, I'd had this happen once with a non vette, which turned out to be the coil.
Jebby
Pro
Joined: May 2013
Posts: 672
Likes: 31
From: Rapid City South Dakota
As the temperature of the coil goes up, the internal resistance increases and the voltage drops. I had this happen recently because the rotor tine had broken, which overworked the coil and caused the overheating. Good luck.
