Pinion Shaft Coating
Thread Starter
Advanced
Joined: Aug 2012
Posts: 55
Likes: 1
Pinion Shaft Coating
Does anyone know what the black coating is on the C3 pinion shaft's two bearing journals? I fine sanded the coating off and the diameters were reduced about 0.0003". Can the pinion shaft still be used?
Burning Brakes
Joined: Aug 2013
Posts: 1,071
Likes: 322
From: palm springs ca
Dom
Race Director
Joined: Dec 2004
Posts: 10,332
Likes: 63
From: PARADISE
St. Jude Donor '09-'11-'12-'13-'14
If you only took off 3/10,000, and the bearings will still need to be pressed on, don't worry about it. If you took off .003" you have a problem.
Do the bearings slide on easily, if so, don't use it.
Do the bearings slide on easily, if so, don't use it.
