Camshaft
Thread Starter
1st Gear
Joined: Feb 2017
Posts: 1
Likes: 0
Camshaft
Hi have an old jaguar xj6 which has a 350 small block chev engine also has a 600cfm holly carb and daul plane manifold has headers was thinking about fitting a sealed power camshaft lit 480/480 dur 287/287 dur 050 230/230 109 looking for something with low to midrange talk
Race Director
Joined: May 2006
Posts: 18,662
Likes: 2,563
Are you looking for a camshaft with a rough idle? Doesnt seem like the cam you would use with a 600 CFM Holley with a range of 3k rpm to 6k rpm. Which transmission and rear end ratio are you using.
https://www.summitracing.com/parts/s...make/chevrolet
If you want sealed power seems like this would be better
https://www.summitracing.com/parts/s...169r/overview/
https://www.summitracing.com/parts/s...make/chevrolet
If you want sealed power seems like this would be better
https://www.summitracing.com/parts/s...169r/overview/
Last edited by MelWff; Feb 27, 2017 at 11:32 AM.
