sylviac4321

I am in the process swapping out engine 350 to a 454 engine.The car is a 1977 corvette. What pulleys and brackets will I need. Please provide specific details on the process for installation. Your support is highly appreciated!

0Willcox Corvette

You should go for the pulleys and brackets from a 1974 big block. But you might look for used..

Lower Crank Pulley.
https://willcoxcorvette.com/corvette...-427-454-68-74

Idler
https://willcoxcorvette.com/corvette...itioning-69-74

Water pump
https://willcoxcorvette.com/corvette...lacement-style

Power Steering
https://willcoxcorvette.com/corvette...ulley-bb-65-74

But then you'll need the brackets too...

You might look for some aftermarket pulleys that would work... in that field, I know nothing... maybe someone else will chime in.

Willcox

Jbster

Lots of info in this thread: https://www.corvetteforum.com/forums...me-please.html

72 Project

Maybe this will help.

http://www.kwikperf.com/bbc_serp_kit.html

Jim