Idler Arm Bolt
08-14-2017, 03:10 PM
#2
Safety Car
look at the head of the bolt to determine which grade bolt is currently in place.
if it is a hardened bolt leave it. sounds original because several times,
I have had to replace that bolt with a shorter version for header clearance.
if it is a hardened bolt leave it. sounds original because several times,
I have had to replace that bolt with a shorter version for header clearance.
Last edited by 69Vett; 08-14-2017 at 04:52 PM.
The following users liked this post:
Burnt71 (08-14-2017)
08-14-2017, 03:23 PM
#3
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi B71,
The lower idler arm bolt is typically quite long.
Maybe not 1-1/2" too long, but certainly longer than it appears that it needs to be.
???
Regards,
Alan
The lower idler arm bolt is typically quite long.
Maybe not 1-1/2" too long, but certainly longer than it appears that it needs to be.
???
Regards,
Alan
The following users liked this post:
Burnt71 (08-14-2017)
The following users liked this post:
Burnt71 (08-14-2017)
