Horn Help
Thread Starter
Racer
Joined: Sep 2011
Posts: 414
Likes: 55
From: Humboldt county Ca
Horn Help
1975 T&T column. PO gutted the horn so I have little left. Looking for comprehensive instructions and ALL the parts inside the column to make the horn work again. Can't tell if the "horn rebuild" kits sold by the vendors are complete. Downloaded Jim Shea papers but horn wise they seem basic.
Thanks.
Stump
Thanks.
Stump
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,853
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
1975 T&T column. PO gutted the horn so I have little left. Looking for comprehensive instructions and ALL the parts inside the column to make the horn work again. Can't tell if the "horn rebuild" kits sold by the vendors are complete. Downloaded Jim Shea papers but horn wise they seem basic.
Thanks.
Stump
Thanks.
Stump
Race Director
Joined: Apr 2009
Posts: 19,294
Likes: 2,754
From: Charlotte NC
If you are needing 'A' in Willcox's post...also make sure that you CAREFULLY look at the lower horn contact that "A' goes into. They can break and thus....there is no notch that will allow the little nub of plastic that is made into the black plastic part of part 'A' to lock an hold in place.
If it is broken...this is the part you will need for the tele-tilt column.
https://willcoxcorvette.com/corvette...-contact-69-82
And more than likely you will want to get one of these also...because they break.
https://willcoxcorvette.com/corvette...-fingers-70-89
DUB
If it is broken...this is the part you will need for the tele-tilt column.
https://willcoxcorvette.com/corvette...-contact-69-82
And more than likely you will want to get one of these also...because they break.
https://willcoxcorvette.com/corvette...-fingers-70-89
DUB
Last edited by DUB; Oct 19, 2017 at 07:13 PM.
