Sending Unit wire(s)?
Thread Starter
Racer
Joined: May 2006
Posts: 423
Likes: 3
From: New Port Richey, FL
Sending Unit wire(s)?
I looked everywhere on here to find this but couldn't. On a '76 gas tank sending unit, there's a tan (ohms) wire that goes to the tank from the gauge, and a pink(voltage) wire that also goes to the gauge. My simple question is this - Is there only one wire that goes to the sending unit in the tank? (ohms) wire probably. Thanks
Melting Slicks
Joined: Oct 2010
Posts: 2,276
Likes: 337
From: "ɹǝpunuʍop", Adelaide, South Australia
not much help here, but there was only the tan that ran from the dash, and an a short earth from the sender to the frame on my '72.
i replaced the then 43 yr old with a new piece years ago, as i thought the old wires resistance was affecting the fuel gauge reading.
i replaced the then 43 yr old with a new piece years ago, as i thought the old wires resistance was affecting the fuel gauge reading.
Race Director
Joined: May 2006
Posts: 18,755
Likes: 2,589
this article from Wiilcox explains how everything works
http://repairs.willcoxcorvette.com/w...it-testing.pdf
http://repairs.willcoxcorvette.com/w...it-testing.pdf
