81 Corvette poor idle
Thread Starter
Burning Brakes
Joined: Aug 2006
Posts: 1,058
Likes: 27
From: Eastern North Carolina
81 Corvette poor idle
This is a completely refurbished carburetor that runs great but has a very rough idle. The Carb is set to factory specs and the computer is not pulling any codes. The Dwell is floating right around 30 degrees. One thing I noticed is when adjusting the mixture screws the screw on the driver side does not have any effect on the idle. I can screw it all the way in and nothing changes. Any thoughts would be greatly appreciated.
Race Director
Joined: May 2006
Posts: 18,660
Likes: 2,562
