When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
so here are a few vids of my exhaust setup. First couple vids are with the OBX straight pipe side pipes. The last two vids are with the chambered 2.5” vettepack inserts. The idling and low rpm driving has been toned down significantly to the point where you can have a conversation or listen to the radio. But when you mash the gas it still gets pretty darn loud. Enjoy!!!
Thanks for posting this..
Just to be sure, these are the 25vp-in inserts without the sound deadening wrap right? they sound WAY quieter than my 2.25 sweet thunders... I was going to go with the 2.5" inserts with the sound deadening wrap but now I wonder if that will be too quiet?
Thanks for posting this..
Just to be sure, these are the 25vp-in inserts without the sound deadening wrap right? they sound WAY quieter than my 2.25 sweet thunders... I was going to go with the 2.5" inserts with the sound deadening wrap but now I wonder if that will be too quiet?
Yes this is the 25vp in 2.5". I was thinking of going with the VL insert that has the holes and the sound deadener but after speaking with Eric we decided the vp is the one I needed. From what I gathered, the louvered VL is going to be louder than the VP insert I got. I actually quite enjoy the sound level that I have right now, its pretty tame with a nice deep idle and when you want to be heard just hit the gas and it gets pretty loud.