When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My big chrome Craftsman timing light took a dump a while back and I bought a harbor freight pos that isn't very bright.
So, any recommendations for a good, bright, light for home use?
My big chrome Craftsman timing light took a dump a while back and I bought a harbor freight pos that isn't very bright.
So, any recommendations for a good, bright, light for home use?
My Innova timing light is plenty bright.
It has an LCD screen with tachometer and an electronic dial-back function.
Edit:
I went out to my shop to hang out while the wife was getting ready to go out to dinner, so I looked. Mine is their model 3568.
Last edited by wendellp601; Nov 22, 2020 at 05:10 PM.
The dial backs work ok at 3000 rpm or so when the multiple sparks turn into one spark. Doesn’t help setting initial or base timing but works fine for total. That said, I love my Flaming River self powered light. Works great. I have tested my dial back against it and the dial back is accurate once the rpm where the multiple sparks stop is reached.
From: Las Vegas - Just stop perpetuating myths please.
If using a multispark ignition box like I do the only timing light I trust is the MSD and they're over $150. I bet there are others less expensive that will work with a multispark box but none of them advertise this.
I'm in suntree rockledge is just up the road.another forum member live in rockledge. Small world.
Not to change the subject too much, but I'm in Viera. And new to vettes, so looking to hang out with and learn from some other folks.
Where's the best place to meet up and do that?