Quick electrical help
Thread Starter
Pro
Joined: Jan 2002
Posts: 624
Likes: 0
From: Marietta ga
Quick electrical help
Where should i hook up the wire on my sterio labled "night illumination" to. It is obiously so i can see the display at night. also there is a wire labed "back up B" which i believe might be the reason my radio does not keep any pre-sets after i turn the ignition off. The brand is Coustom Audio. any help apriciated :confused:
Safety Car
Joined: Jul 2002
Posts: 3,770
Likes: 3
From: St Louis MO
Re: Quick electrical help (Cory1970)
Where should i hook up the wire on my sterio labled "night illumination" to.
also there is a wire labed "back up B"
[Modified by Brettmc, 3:14 PM 12/26/2002]
Safety Car
Joined: Jan 2001
Posts: 4,660
Likes: 3
From: South Central Louisiana
St. Jude Contributor
Re: Quick electrical help (Brettmc)
Where should i hook up the wire on my sterio labled "night illumination" to.
headlight or dashlight circuit.
also there is a wire labed "back up B"
hot, as in constant 12-volt.
[Modified by Brettmc, 3:14 PM 12/26/2002]
headlight or dashlight circuit.
also there is a wire labed "back up B"
hot, as in constant 12-volt.
[Modified by Brettmc, 3:14 PM 12/26/2002]
In other words, hook the Backup B to your positive wire that goes to the clock.
Hook the illum to the positive wire that goes to one of the dash lights.
