When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
From: At my Bar drinking and wrenching in Lafayette Colorado
The stock GM throttle cable. Sold by all of the Corvette parts vendors. Paragon sells it under part number 2330, which is the same cable as used on all 1968 - 1973 small block cars.
Since you plan to replace your throttle cable, I'm thinking you've already considered the stock one. I replaced mine with a Lokar. It's easier to adjust for full throttle with any carb. This......https://www.summitracing.com/parts/lok-tc-1000u
I actually just got done replacing mine with the Mr. Gasket 5657 kit. It was actually very easy and I already had an end adapter that worked well with my Holley Sniper system.
Im going to replace my throttle cable on my 1968 small block car. What brand or model is recommended?
If everything is stock then go with a OE cable from Paragon or similar vendor as another poster said. If you have a non OE carb and non OE intake and have an automatic and need kickdown cables etc I suggest picking up a Lokars cables with the appropriate bracket.
