C3 1974 Corvette - Headlight Replacement..Help!
I've been in the process of restoring a salvaged 1974 C3 Stingray Convertible and I recently removed the headlights from the vehicle. I've ordered these replacements through Octane Lighting. All of the the screws/adjusters/rings were rusted out but after some thoughtful elbow grease, I was able to complete the removal (see below).
I will be purchasing new screws, rings and accessories since I know what I tried to salvage has no business going back on the vehicle. Anyways.. I inspected the electrical running forward to the headlights and I came across this abandoned electrical plug (see below).
The two (2x) front and the two (2x) side turn signals have power running to them so I assume that this electrical plug does NOT supply the DRIVER SIDE power source to either of them. I did NOT notice/find a PASSENGER SIDE partner to this electrical plug. At this point, I am struggling to understand/identify the intent of this electrical source. Any information that this commuinity can provide would be extremely helpful as to the purpose of this electrical plug. I appreciate your insights on this matter in advance!
Sincerely,
Barry Dean
Hope this helps!
Tooch
The switch location. Photo from former CF member Alan71.
Last edited by Tooch1; Apr 23, 2023 at 09:28 PM.


Looking at the front of your car the order is C B D A.
You may want to be sure that your new bulbs fit each bucket.








