Help with A/C mounting bracket
Thread Starter
Advanced
Joined: Sep 2020
Posts: 90
Likes: 13
Help with A/C mounting bracket
Hey guys. I am reinstalling my 350 motor on my 1976 L48. I put edelbrock 5089 e-street heads on the motor. The stock mounting bracket for the A/C compressor won't clear the heads. Anyone have any suggestions/ solutions? Thanks.
Advanced
Joined: Jan 2014
Posts: 74
Likes: 17
From: Hermitage TN
Try Alan Grove Components, https://alangrovecomponents.com/index.htm (913-837-4368). I purchased my A/C bracket from them when I installed a Sanden Compressor. Install on 79 with Edelbrock RPM Performance Heads. I received great customer service from them
Thread Starter
Advanced
Joined: Sep 2020
Posts: 90
Likes: 13
Try Alan Grove Components, https://alangrovecomponents.com/index.htm (913-837-4368). I purchased my A/C bracket from them when I installed a Sanden Compressor. Install on 79 with Edelbrock RPM Performance Heads. I received great customer service from them
Race Director
Joined: Nov 2006
Posts: 13,228
Likes: 7,825
From: Sunshine Coast, Queensland, Australia
2025 C3 of the Year Finalist - Modified
2024 C3 of the Year Finalist- Modified
2022 C3 of the Year Finalist - Modified
Cruise-In VIII Veteran
I'm running E Street heads for over 6 years now. The outside dimensions and location of accessory mounting holes are extremely close to the factory heads. For the life of me I can't understand his interference issue. Perhaps he's talking about the upper support that goes back to the intake manifold???
Tall valve covers would interfere with that.
Tall valve covers would interfere with that.
