When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Would you say these are dead? I’m making a list of my next upgrade/fix and just wanted to check by pictures would you say these a arm bushings are dead?
I would replace them if it were my car. I would also replace the ball joints while the arms are out of the car.
An extra nice touch would be to clean them and paint or powder coat them.
looks like one got a lttle tweaked too.it will ride so much better when done!
replace sway bar bushings too.. you know new springs are not too expensive while there check idler arm and suspension components while there
It’s a bit of work to replace all that.. i would make sure your components are good rubber and nothing manufactured in china. Most should be usa /mexico .
make sure you final tighten on ground
Well… I’ve ordered from corvette america so… I know it’s not a guarantee, but as I live half a globe away I need to buy in kits, otherwise shipping would kill me. I guess beggars can’t be choosers.
Help wanted - bushings
check idler arm and suspension components while there
