4 speed issues
Thread Starter
Burning Brakes
Joined: Dec 2003
Posts: 1,149
Likes: 153
4 speed issues
About 3 weeks ago it started to be difficult to shift into reverse,first to forth is fine,putting into second then reverse it's hard to find and rough putting it in reverse.The fluid id full and all the bolts are tight.The linkage seems o.k.It doesn't matter if the vette is running or not.It's a Hurst super comp shifter.The clutch pedal is about 3 inches above the brake pedal(use always that way).It doesn't seem to engage till it's flush with the brake pedal.Could it just be an adjustment isssue? your thoughts on this matter would be appreciated.thank you,
Pro
Joined: Dec 2015
Posts: 578
Likes: 107
From: colo
The clutch could need adjusting , but I would check all the linkage first , including the levers mounted to the trans for excessive movement. I am not familiar with the Hurst shifter , but I had to realign my factory shifter at least once .
Ed
Ed
