Power Window Electrical Problem
Thread Starter
Navigator
Joined: Apr 2026
Posts: 9
Likes: 0
Power Window Electrical Problem
Hello,
My power windows stopped working since I pulled the A/C fuse while I was replacing some of the A/C parts. I thought that they may have shared a fuse / circuit so I did not think anything of it, but now that I have put it back in they still do not work. Manual says it needs a 30 amp fuse (might be a 30 amp circuit breaker but I need to check again) but when I went to the fuze box I found a 20 amp circuit breaker in its place. I am puzzled to say the east, especially since they worked before and I did not touch any thing else when I was working on the A/C. All other electronic stuff still works. Thanks in advance for all the help!
My power windows stopped working since I pulled the A/C fuse while I was replacing some of the A/C parts. I thought that they may have shared a fuse / circuit so I did not think anything of it, but now that I have put it back in they still do not work. Manual says it needs a 30 amp fuse (might be a 30 amp circuit breaker but I need to check again) but when I went to the fuze box I found a 20 amp circuit breaker in its place. I am puzzled to say the east, especially since they worked before and I did not touch any thing else when I was working on the A/C. All other electronic stuff still works. Thanks in advance for all the help!
Intermediate
Joined: May 2005
Posts: 39
Likes: 2
From: Bay Point, CA
You don't say what year your Corvette is.
I have a stock 1972 and the PW circuit breaker is mounted on the firewall by the master cylinder next to the Vehicle Emission Control Information sticker.
I have a stock 1972 and the PW circuit breaker is mounted on the firewall by the master cylinder next to the Vehicle Emission Control Information sticker.
