Bonding Adhesive?
Race Director
Joined: Mar 2001
Posts: 12,577
Likes: 0
From: I live in my Hubby's little world
Re: Bonding Adhesive? (Ki m Le)
Be really careful with that stuff!!!!!!!!!
When we were doing my rear bumper Hubby put just alittle too much on..and when we were cranking down the bolts ..it dripped down and got in his hair!!!!!! WHAT a chore to get that stuff out!!!!!!!!!!!!!!!!!!!!!! :eek:
When we were doing my rear bumper Hubby put just alittle too much on..and when we were cranking down the bolts ..it dripped down and got in his hair!!!!!! WHAT a chore to get that stuff out!!!!!!!!!!!!!!!!!!!!!! :eek:
Le Mans Master
Joined: Jun 2002
Posts: 8,339
Likes: 24
From: I can walk to MA
Re: Bonding Adhesive? (LakotasRose)
Be really careful with that stuff!!!!!!!!!
When we were doing my rear bumper Hubby put just alittle too much on..and when we were cranking down the bolts ..it dripped down and got in his hair!!!!!! WHAT a chore to get that stuff out!!!!!!!!!!!!!!!!!!!!!! :eek:
When we were doing my rear bumper Hubby put just alittle too much on..and when we were cranking down the bolts ..it dripped down and got in his hair!!!!!! WHAT a chore to get that stuff out!!!!!!!!!!!!!!!!!!!!!! :eek:
DOHHH !
I am using this: Evercoat 870
I have about a 1/2 quart left. I was hoping another quart would get the front clip bonded on. There is another header bar post right now. I would consider
a more flexible adhesive for the header bar.
:seeya
[Modified by NHvette, 12:23 AM 4/3/2003]
Drifting
Joined: Jul 2002
Posts: 1,855
Likes: 0
From: Cocoa Beach FL
Re: Bonding Adhesive? (NHvette)
I just used "SMC" (I'm not sure if that's the name of the product or just the name of the material) to put on the fornt bumper on my '73 and it seems to have held fine so far. :thumbs:
Safety Car
Joined: Mar 2000
Posts: 4,078
Likes: 27
From: Northeast South Dakota
Re: Bonding Adhesive? (NHvette)
I use the evercoat 2 part epoxy bonding adhesive with a 1:1 mixing ratio because it is recommended for use on everything including metal to fiberglass bonding. You will probably need a couple of quarts.
-Justin
-Justin
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Jun 2002
Posts: 8,339
Likes: 24
From: I can walk to MA
Re: Bonding Adhesive? (Dalannex)
I use the evercoat 2 part epoxy bonding adhesive with a 1:1 mixing ratio because it is recommended for use on everything including metal to fiberglass bonding. You will probably need a couple of quarts.
-Justin
-Justin
