Front Spring conversion Done!
Thread Starter
Burning Brakes
Joined: Sep 2002
Posts: 1,179
Likes: 3
From: SF East Bay CA
Front Spring conversion Done! PICS ADDED and TT II pic in sig
Finished the front monospring conversion tonight.. Pretty easy (using a lift.. read the instructions as I thought I had to rengineer the project.. Shocks on first Looks great.. got a bit tired (11:30 p.m.), so I did not lower the car yet.. Very happy... pics will follow on web site (not updated since Oct.)
Thanks everyone for all of the assist
Adding pics as I got them uploaded
[Modified by timbo79, 1:19 PM 4/12/2003]
[Modified by timbo79, 1:19 PM 4/12/2003]
[Modified by timbo79, 1:23 PM 4/12/2003]
[Modified by timbo79, 1:25 PM 4/12/2003]
Thanks everyone for all of the assist
Adding pics as I got them uploaded
[Modified by timbo79, 1:19 PM 4/12/2003]
[Modified by timbo79, 1:19 PM 4/12/2003]
[Modified by timbo79, 1:23 PM 4/12/2003]
[Modified by timbo79, 1:25 PM 4/12/2003]
Race Director
Joined: Jun 2001
Posts: 16,483
Likes: 1
From: The Only Corvette in Gila Bend, Az.
St. Jude Donor '09
Re: Front Spring conversion Done! (ZD75blue)
Sounds like fun...
Cant wait till the update on how she handles! :cheers:
Cant wait till the update on how she handles! :cheers:
Le Mans Master
Joined: Nov 2000
Posts: 8,220
Likes: 208
Re: Front Spring conversion Done! (timbo79)
Sounds great. I was playing with my mono spring yesterday and I had it in the lowest position possible, the wheels were approx. 0.5" from the wheel wells and this is with out the big block in! I love the system even though I haven't yet driven it! :cheers:
Thread Starter
Burning Brakes
Joined: Sep 2002
Posts: 1,179
Likes: 3
From: SF East Bay CA
Re: Front Spring conversion Done! (groovyjay)
Handles pretty darn well!! Posted pics so you can see how it looks installed.
Also new wheel Pic I would recomend this set up I put the setting at "Level 2" and it handles great. Used the Alignment specs from VBP and it sticks!
This and the TT II's are great
Also new wheel Pic I would recomend this set up I put the setting at "Level 2" and it handles great. Used the Alignment specs from VBP and it sticks!
This and the TT II's are great
