1350 U joints
Thread Starter
Pro
Joined: Mar 2002
Posts: 511
Likes: 0
From: St. Louis MO
1350 U joints
Whos converted a 1310 driveshaft to a 1350? Where did you get the transmission yoke and the Pinion yoke. I need to do this with the smallest budget possible. I already have to shorten the driveshaft but I would really like to upgrade at the same time.
Melting Slicks
Joined: Jun 2001
Posts: 2,429
Likes: 14
From: CA
Le Mans Master
Joined: Feb 1999
Posts: 5,877
Likes: 1
From: Park Ridge IL
Re: 1350 U joints (442olds)
I have a Denny driveshaft with 1350 ujoints and yokes. The transmission yoke and ujoints is included with the driveshaft from Denny's and I also bought a pinion yoke from them as well. I ended up swapping out the tranny yoke that denny's sent for a forged 2-piece yoke from Strange since it's impossible to install the driveshaft with a one-piece yoke if the tranny and rear end are in the car (unless you take the ujoint apart and install it in the driveshaft after the driveshaft is installed - not easy).
http://www.strangeengineering.net
http://www.markwilliams.com
[Modified by Monty, 11:52 AM 4/22/2003]
http://www.strangeengineering.net
http://www.markwilliams.com
[Modified by Monty, 11:52 AM 4/22/2003]
