HYDRATECH GROUP PURCHASE !
Thread Starter
Instructor
Joined: Jan 2003
Posts: 173
Likes: 1
From: Warren MI
Re: HYDRATECH GROUP PURCHASE ! (tjl5709)
tjl - the installation of the Steeroids is no problem! Arkansas Flash is running the combo... Maybe we can get him to chime in here? :cheers:
Instructor
Joined: Dec 1999
Posts: 195
Likes: 1
From: Van Buren AR
Re: HYDRATECH GROUP PURCHASE ! (Hydratech Braking)
tjl5709,
I have had the Hydroboost unit and the Steeroid rack and pinion steering in my 78 pace car for a couple of months now. I have over 2000 miles on the two and they work together just fine. There was no installation problems running the pressure lines or anything, it was just basic common sense.
Go ahead and get the Hydroboost unit. You won't regret it. It's the best investment you can make for your shark and your safety.
I have had the Hydroboost unit and the Steeroid rack and pinion steering in my 78 pace car for a couple of months now. I have over 2000 miles on the two and they work together just fine. There was no installation problems running the pressure lines or anything, it was just basic common sense.
Go ahead and get the Hydroboost unit. You won't regret it. It's the best investment you can make for your shark and your safety.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Pro
Joined: Jul 2003
Posts: 627
Likes: 20
From: Ann Arbor MI
Re: HYDRATECH GROUP PURCHASE ! (Hydratech Braking)
Thanks guys for the follow-up.
I had to put my car hobby on hold for the past couple years seeking a grad degree, but I'm now seeking to get my life back in order.
Having found this site resently, I cannot compliment and thank everyone enough who contributed to the wealth of information I have been able to obtain for my shark.
Heres to ya............ :cheers:
I had to put my car hobby on hold for the past couple years seeking a grad degree, but I'm now seeking to get my life back in order.
Having found this site resently, I cannot compliment and thank everyone enough who contributed to the wealth of information I have been able to obtain for my shark.
Heres to ya............ :cheers:
Thread Starter
Instructor
Joined: Jan 2003
Posts: 173
Likes: 1
From: Warren MI
Good News!
Due to the success of the group purchase on the Pro-Touring.com forum, we have definitely acheived the minimum amount of orders needed to produce the group purchase pricing! :thumbs:
I'm also confident that a few people I have spoken with over the last few days that haven't made up their minds yet will no doubt end up placing an order at the last minute. Though only 9 are officially listed - let's go ahead and call it "good". :cool:
We are now taking group purchase orders! Feel free to call in your orders at (586) 427-6970 or (586) 531-2115.
:cheers:
[Modified by Hydratech Braking, 9:18 PM 7/31/2003]
I'm also confident that a few people I have spoken with over the last few days that haven't made up their minds yet will no doubt end up placing an order at the last minute. Though only 9 are officially listed - let's go ahead and call it "good". :cool:
We are now taking group purchase orders! Feel free to call in your orders at (586) 427-6970 or (586) 531-2115.
:cheers:
[Modified by Hydratech Braking, 9:18 PM 7/31/2003]
Thread Starter
Instructor
Joined: Jan 2003
Posts: 173
Likes: 1
From: Warren MI
Re: Good News! (rainman69)
Dave, I have edited the order placement deadline to an open status to accomodate our customers better - no rush, call in your order at your convenience. :flag
Racer
Joined: Jul 2003
Posts: 304
Likes: 0
From: Corinth Tx
Re: Good News! (Hydratech Braking)
well i got mine in and drove it about 5 miles cant wait till the morning to realy drive it
how is eveyone elses going
ohyea i did it with out removeing the seat or steering calum
how is eveyone elses going
ohyea i did it with out removeing the seat or steering calum
Racer
Joined: Jul 2003
Posts: 287
Likes: 0
From: Dayton Area Ohio
Re: Good News! (dewcustom)
I posted my install update in another topic..... I removed the seat, but not the steering column... the clevis pin clip was a major *!@&!@ !!! :cuss
But otherwise it bolted right up... till I went to check hood clearence... Damn thing hits the hood on the master cylinder!
I'm going to mill a shim to go behind the baseplate, to angle this whole unit more to the level position, -vs- the sky bound attittude. I'll post some pics once I get it done.... :leaving:
But otherwise it bolted right up... till I went to check hood clearence... Damn thing hits the hood on the master cylinder!
I'm going to mill a shim to go behind the baseplate, to angle this whole unit more to the level position, -vs- the sky bound attittude. I'll post some pics once I get it done.... :leaving:
Racer
Joined: Jul 2003
Posts: 304
Likes: 0
From: Corinth Tx
Re: Good News! (69Rat)
thats odd my mc is in the same place as before
that pin was a pain in the butt t get back on
on my first try it flick off and went flying i spent forever looking for it pulled back the carpet and looked and looked but finely gave up and decided to get a new one while getting up it fell from who knows where and landed in the floor bord, figures. :crazy:
that pin was a pain in the butt t get back on
on my first try it flick off and went flying i spent forever looking for it pulled back the carpet and looked and looked but finely gave up and decided to get a new one while getting up it fell from who knows where and landed in the floor bord, figures. :crazy:
