Headers on angle plugged heads.
Thread Starter
Racer
Joined: Sep 2001
Posts: 369
Likes: 0
From: Millington TN
Headers on angle plugged heads.
I have called Heddman, Dynomax and several other places. No one seems to make a header for a SportsmanII angle plug head in a Vett. Not even a block hugger(Which i find impossible to beleive)
Please some one help!!!! I'm supposed to be putting the engine on the frame tomorrow and the body back on in a couple of weeks.
Please some one help!!!! I'm supposed to be putting the engine on the frame tomorrow and the body back on in a couple of weeks.
Race Director
Joined: Mar 2001
Posts: 11,322
Likes: 1
From: Living in the Hartland
Re: Headers on angle plugged heads. (honaker)
Specifications:
* Primary tube size: 1 5/8 in.
* Collector size: 3 in.
* Finish: Ceramic coated
* Air conditioning equipped vehicles require bracket, WLK-88304.
* Exhaust mounted alternator requires bracket, WLK-88300.
* Will fit angle plug heads.
http://store.summitracing.com/partde...6008&view=1024
* Primary tube size: 1 5/8 in.
* Collector size: 3 in.
* Finish: Ceramic coated
* Air conditioning equipped vehicles require bracket, WLK-88304.
* Exhaust mounted alternator requires bracket, WLK-88300.
* Will fit angle plug heads.
http://store.summitracing.com/partde...6008&view=1024
Le Mans Master
Joined: Apr 2000
Posts: 7,562
Likes: 9
From: B'Ville NY
Cruise-In III Veteran
St. Jude Donor '05
Re: Headers on angle plugged heads. (Fevre)
I had headers on my vette when I bought it and afterwards mounted Sportman II's angled plug with no problems & now have the Hooker SuperComps sidemount headers without problems ;) .
Team Owner
Joined: Apr 1999
Posts: 21,953
Likes: 1,445
From: Reno Nevada
2024 C3 of the Year Finalist- Modified
Re: Headers on angle plugged heads. (SmokedTires)
I have hooker supercomp's 1 3/4 X 28 3 1/2 inch collectors made for angle plug heads. Give summit racing a call. They are a little pricey @ $600 with ceramic coating.
Team Owner
Joined: Jul 1999
Posts: 65,492
Likes: 230
From: Orange Park Florida
Re: Headers on angle plugged heads. (honaker)
Schoenburg headers #150 series...I have the 1.75 on my car, and they fit fine with any head in my '72......one thing though, for some reason the pass side did need mods to bend the collector away from the stock starter motor....seems kind of dumb....
GENE
GENE
Drifting
Joined: Sep 1999
Posts: 1,908
Likes: 0
From: Manassas, VA, USA
Re: Headers on angle plugged heads. (honaker)
Most of the reputable headers will fit with angle-plug heads. I know the hookers will, because I helped a friend install them on a Vette with Sportsman II heads about 3 months ago.
The reason they won't claim they fit is a liability thing. There are more bubbas than mechanics out there, and a lot of people won't bother to route their plug wires correctly - then they burn on the headers, and bubba blames the manufacturer. :rolleyes:
The reason they won't claim they fit is a liability thing. There are more bubbas than mechanics out there, and a lot of people won't bother to route their plug wires correctly - then they burn on the headers, and bubba blames the manufacturer. :rolleyes:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Team Owner
Joined: May 2001
Posts: 29,745
Likes: 3
From: Exiled to Richmond, VA - Finally sold my house in Murfreesboro, TN ?? Corner of "Bumf*&k and 'You've got a purdy mouth'."
CI 6-7-8 Veteran
CI-VIII Burnout Champ
St. Jude Donor '06-'10, '13
Re: Headers on angle plugged heads. (honaker)
I have the Hedman headers on mine, with the angle plug L98 Corvette heads.
Part number 68300-1 I do believe. They are thermal coated, fits C3's and works with my angle plug heads just fine.
Part number 68300-1 I do believe. They are thermal coated, fits C3's and works with my angle plug heads just fine.
