Question for '69 owners.
Thread Starter
Drifting
Joined: Nov 2002
Posts: 1,691
Likes: 203
From: Loveland, CO
Question for '69 owners.
I replacing my mangled front clip with a new one piece unit from The Corvette Image in Gresham, Oregon. My new clip came with four small bonding strips (unmounted) that fit around underneath the headlight openings. They supposedly reinforce this area. I am having trouble figuring out how they bond on. My assembly manual doesn't show them, and I understand all '69's did not have them. They are 8" and 10" long. One is curved on the end, so I assume it fits around the curve of the opening on the inner edges of each headlight opening. The other piece has a lip on it, but it could go anywhere on the outer sides. I realize a picture under there is practically impossible, but if someone is familiar with them and can give me a sketch or explaination of how they mount, I would be most appreciative. Thanks. :banghead:
C6 the C5 of tomorrow
Joined: Nov 2000
Posts: 6,665
Likes: 2
From: Twin Cities Minnesota
Re: Question for '69 owners. (rponfick)
I think I know what you are talking about.
Are they l shaped pieces? Mine have long pieces like that on both sides of the headlight openings. The L's all face the center oif the car like this:
|_ headlight |_ _| headlight _|
---------- ------- ---------
(Well that is upside down, I can't do it rightside up with text)
Also ther is about 1/2" between the edge of the L and the headinght opening.
Hope this helps
Are they l shaped pieces? Mine have long pieces like that on both sides of the headlight openings. The L's all face the center oif the car like this:
|_ headlight |_ _| headlight _|
---------- ------- ---------
(Well that is upside down, I can't do it rightside up with text)
Also ther is about 1/2" between the edge of the L and the headinght opening.
Hope this helps
