C3 Tech/Performance V8 Technical Info, Internal Engine, External Engine, Basic Tech and Maintenance for the C3 Corvette
Sponsored by:
Sponsored by:

Help Hood is stuck down

Thread Tools
 
Search this Thread
 
Old Oct 2, 2003 | 11:47 AM
  #1  
Clown Puncher's Avatar
Clown Puncher
Thread Starter
Instructor
 
Joined: Jul 2003
Posts: 112
Likes: 0
From: Little Elm Tx
Default Help Hood is stuck down

I replaced the hood latch cross cable, and then it came off when the hood was down. Now the hood is still latched on the passenger side of the car. This is a 71. I took the gill off and can get my arm up there, but not enough to get the latch to budge. I think I can feel the latch but because of where it sits I cannot see it or turn it. Does anybody know how to get it unlatched? :banghead:


[Modified by Clown Puncher, 1:39 PM 10/2/2003]
Reply
Old Oct 2, 2003 | 11:56 AM
  #2  
70454's Avatar
70454
Safety Car
20 Year Member
 
Joined: Aug 2000
Posts: 3,734
Likes: 2
From: Southeastern PA
Default Re: Help Hood is stuck down (Clown Puncher)

I had the same problem when I was adjusuting the latches on my hood. I laid on my back and reached up there with my hand. I got pretty cut up the first few times and then realized to wear a glove use a screwdriver handle to push the latch to the side to get the hood to pop up. You will need lighting.

Good luck.


[Modified by 70454, 10:57 AM 10/2/2003]
Reply
Old Oct 2, 2003 | 11:58 AM
  #3  
guppie's Avatar
guppie
Melting Slicks
20 Year Member
Conversation Starter
All Eyes On Me
 
Joined: Dec 2002
Posts: 2,342
Likes: 2
From: Dayton Area Ohio
St. Jude Donor '08
Default Re: Help Hood is stuck down (Clown Puncher)

I know on the later C3's there are rubber grommets in line with each latch. Remove the grommet and insert a long screwdriver or similar item and pop the latch. I assume yours has it also. Good Luck :cheers:
Reply
Old Oct 2, 2003 | 12:01 PM
  #4  
OHSIXX's Avatar
OHSIXX
Team Owner
Supporting Lifetime Gold
Veteran: Army
St. Jude 20 Year Donor
25 Year Member
Liked
 
Joined: Dec 1999
Posts: 26,555
Likes: 257
From: Florida
2021 C2 of the Year Finalist - Modified
C2 of the Year Finalist - Modified 2020
C2 of Year Finalist (performance mods) 2019
St. Jude Donor '03 thru '26
Default Re: Help Hood is stuck down (guppie)

guppie is correct. There was a recent thread of this with pictures and directions, but I do not recall the title. Maybe someone else does because it would like you alot.
Reply
Old Oct 2, 2003 | 01:32 PM
  #5  
72GACRZR's Avatar
72GACRZR
Drifting
20 Year Member
 
Joined: Aug 2002
Posts: 1,731
Likes: 22
From: Marietta Ga.
Default Re: Help Hood is stuck down (OHSIXX)

Here's the link to the instructions.
http://www.madvet.com/shop?store=1&c...236&frame=3852

:seeya
Reply
Old Oct 2, 2003 | 02:15 PM
  #6  
Clown Puncher's Avatar
Clown Puncher
Thread Starter
Instructor
 
Joined: Jul 2003
Posts: 112
Likes: 0
From: Little Elm Tx
Default Re: Help Hood is stuck down (72GACRZR)

Thanks 72GACRZR. I appreciate it. I tried for about an hour and a half last night. I was very frustrated this morning when I went to the garage to see it still down. I will try the technique in the article this evening after work.
Steve


[Modified by Clown Puncher, 1:39 PM 10/2/2003]


[Modified by Clown Puncher, 1:39 PM 10/2/2003]


[Modified by Clown Puncher, 1:43 PM 10/2/2003] :thumbs: :thumbs: :thumbs:


[Modified by Clown Puncher, 1:44 PM 10/2/2003]
Reply
Old Oct 2, 2003 | 02:50 PM
  #7  
marshrat99's Avatar
marshrat99
Melting Slicks
15 Year Member
 
Joined: Aug 2003
Posts: 2,135
Likes: 2
From: Dayton Oh
Default Re: Help Hood is stuck down (Clown Puncher)

One word: Dynomite :lol:
Reply
Old Oct 2, 2003 | 07:21 PM
  #8  
72GACRZR's Avatar
72GACRZR
Drifting
20 Year Member
 
Joined: Aug 2002
Posts: 1,731
Likes: 22
From: Marietta Ga.
Default Re: Help Hood is stuck down (Clown Puncher)

Thanks 72GACRZR. I appreciate it.
Your welcome. That's what we are all here for to help when we can. I don't know as much as most, but I am darn lucky on doing searches.

:seeya
Reply
Corvette Stories

The Best of Corvette for Corvette Enthusiasts

story-0

8 Most "Only Corvette Owners Understand" Quirks and Problems

 Pouria Savadkouei
story-1

10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

 Joe Kucinski
story-2

How Much Horsepower Every Corvette Engine "LOST" in 1972

 Joe Kucinski
story-3

Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

 Michael S. Palmer
story-4

Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

 Joe Kucinski
story-5

150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

 Joe Kucinski
story-6

8 Coolest Corvette Pace Cars (and Replicas) of All Time

 Verdad Gallardo
story-7

Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)

 Joe Kucinski
story-8

Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!

 Verdad Gallardo
story-9

Top 10 Corvettes Coming to Mecum Indy 2026!

 Brett Foote
Old Oct 2, 2003 | 08:41 PM
  #9  
Crash Dummy's Avatar
Crash Dummy
Safety Car
 
Joined: Jun 2002
Posts: 4,844
Likes: 0
From: Pearland TX
St. Jude Contributor
Default Re: Help Hood is stuck down (Clown Puncher)

Clown Puncher....

If you are still *stuck* the next time you check in here's something I ended up doing to get my hood on my '74 unstuck. Although the hood designs are completely different if you can get the driver's side open then you can try it as an option. Like you, my passenger side was seriously stuck as when I installed the hood after putting in the new engine I should have done some more testing of the fit before I closed it. Just because you mark where the brackets were mounted to the hood does not mean it's back the same. Trust me!

So... here we go. Go down to your local Home Depot and buy a 6ft long round rod of 1/4" steel or aluminum. Steel will be cheaper. Just ask and they can direct you to it. After you get it create a 90 degree hook(1-2 " long) on one end and make a longer one on the other end as a handle. Be sure both bent areas are on the same plane so you will know what angle the small hook is when you slide it under the hood. From the small hook end measure 39 1/2" towards the big hook end and mark it. I also have a '71 so I just went and measured things. You will need to slightly pry open the driver's side hood in the back just enough that you can slide that rod underneath and find something to keep it propped open that won't damage the paint. Put a towel or something on the fender and slide the rod under the hood towards the other side to the mark you made on the rod. and you will want the hook pointed towards the back of the car. The latch mechanism on the passenger side will need to be pulled towards you to release that side. It is approximately 6" from the back of the hood on the passenger side. Fish around a few times and pull back when you think you have it. You'll know it when you do as you will feel the spring action. I opened my '74 hood 4-5 times before I figured out what the real problem was. I put some white paint on the hood latch **** and slightly pressed down on the hood(not enough to latch) and found that I needed to adjust it a good 3/8" to one side to not have the hood lock to one side where the cable could not help.

Been there done that. And also undid the front of the hood from the wheel well one time in desperation. Not fun at all. Tone up on your curse words if you go to those means. :cheers:
Reply

Get notified of new replies

To Help Hood is stuck down





All times are GMT -4. The time now is 07:35 PM.

story-0
8 Most "Only Corvette Owners Understand" Quirks and Problems

Slideshow: These are the quirks, annoyances, and oddly lovable problems that every Corvette owner eventually learns to live with.

By Pouria Savadkouei | 2026-05-28 09:31:39


VIEW MORE
story-1
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years

Slideshow: 10 reasons why the C6 Z06 is still a performance benchmark after 20 years.

By Joe Kucinski | 2026-05-27 17:20:09


VIEW MORE
story-2
How Much Horsepower Every Corvette Engine "LOST" in 1972

Slideshow: How much horsepower every Corvette engine lost in 1972.

By Joe Kucinski | 2026-05-27 16:54:53


VIEW MORE
story-3
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!

Slideshow: How to Protect A Convertible Top: 10 DOs & DON'Ts

By Michael S. Palmer | 2026-04-03 00:00:00


VIEW MORE
story-4
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!

Slideshow: The 10 most explosive Corvettes ever built based on power-to-weight ratio.

By Joe Kucinski | 2026-05-20 07:23:03


VIEW MORE
story-5
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter

Slideshow: From C1 to C8 we compare every Corvette generation by the numbers.

By Joe Kucinski | 2026-05-12 16:54:12


VIEW MORE
story-6
8 Coolest Corvette Pace Cars (and Replicas) of All Time

Slideshow: Some Corvette pace cars became collectible legends, while others perfectly captured the look and attitude of their era.

By Verdad Gallardo | 2026-05-11 09:50:51


VIEW MORE
story-7
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)

Slideshow: Ranking the top 10 Corvette engines by torque output.

By Joe Kucinski | 2026-05-05 11:58:09


VIEW MORE
story-8
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!

Slideshow: A Corvette pace car nearly matching IndyCar speeds sounds exaggerated, until you look at the numbers.

By Verdad Gallardo | 2026-05-04 20:03:36


VIEW MORE
story-9
Top 10 Corvettes Coming to Mecum Indy 2026!

Among a rather large group of them.

By Brett Foote | 2026-05-04 13:56:44


VIEW MORE