polishing valve covers
Racer
Joined: Feb 2003
Posts: 316
Likes: 1
From: The Woodlands TX
Re: polishing valve covers (stickboy)
If they are magneseum they can be polished as well yet the seem to oxidize rather easily. I polished a set from an 84 and they look very nice, but don't seem to last.
If anyone has a trick to keep them from doing this I would be greatly indebted. I put a clearcoat on them. That slowed it but they still lose the luster. Should I give up and slap a coat of paint on it like from the factory and move on?
Thanks
If anyone has a trick to keep them from doing this I would be greatly indebted. I put a clearcoat on them. That slowed it but they still lose the luster. Should I give up and slap a coat of paint on it like from the factory and move on?
Thanks
Melting Slicks
Joined: Apr 2000
Posts: 3,286
Likes: 8
From: San Jose California
Re: polishing valve covers (SharkintheWoods)
Not cheap, but Zoops does have a product that may do the trick. I have not used it but I have seen very positive reviews.
http://www.zoops.com/zoopseal.asp
Chuck
http://www.zoops.com/zoopseal.asp
Chuck
