Christmas *FREEBIE* thread...
Thread Starter
Safety Car
Joined: Jun 2002
Posts: 4,844
Likes: 0
From: Pearland TX
St. Jude Contributor
Re: Christmas *FREEBIE* thread... (gdh)
Carb spacer goes to gdh.
This is the last item for tonight and it's for about half of this board who is looking to hop up an engine. I don't know how many times I have seen.... "Can someone run a Desktop Dyno on this setup?"
Item #4: Desktop Dyno 2000(Box, CD & Instructions) - Used(Claimed by pillowmeto) No longer available
[Modified by Winging It, 10:41 PM 12/17/2003]
This is the last item for tonight and it's for about half of this board who is looking to hop up an engine. I don't know how many times I have seen.... "Can someone run a Desktop Dyno on this setup?"
Item #4: Desktop Dyno 2000(Box, CD & Instructions) - Used(Claimed by pillowmeto) No longer available
[Modified by Winging It, 10:41 PM 12/17/2003]
Le Mans Master
Joined: Apr 2003
Posts: 7,154
Likes: 1
From: I blame my Dyslexia MD
Re: Christmas *FREEBIE* thread... (Winging It)
Id like to claim that desktop dyno if you dont mind. It almost went on my christmas list but i decided not to in the end.
How should I contact you for shipping information and ill pay shipping.
MAtt
How should I contact you for shipping information and ill pay shipping.
MAtt
Instructor
Joined: Nov 2001
Posts: 200
Likes: 0
From: Emerald Coast FL
Re: Christmas *FREEBIE* thread... (Winging It)
O.K. I'm in:
I'll throw in my slightly used copy of "Corvette Weekend Projects - Maintenance and Repair How-Tos for 1968-1982 Corvettes" by John Pfanstiehl. Great book for basic repairs or Vette newbies.
Who wants it?
I'll throw in my slightly used copy of "Corvette Weekend Projects - Maintenance and Repair How-Tos for 1968-1982 Corvettes" by John Pfanstiehl. Great book for basic repairs or Vette newbies.
Who wants it?
Thread Starter
Safety Car
Joined: Jun 2002
Posts: 4,844
Likes: 0
From: Pearland TX
St. Jude Contributor
Re: Christmas *FREEBIE* thread... (pillowmeto)
Matt,
The Desktop Dyno is yours.
Header wrap is now gone.
And thanks to Budman78 & NOTHIN'LIKE'A'69 for offering to join in. I've got a couple of nice things that I will add tomorrow and a few nik-naks to those who are just looking for missing parts to C-3's.
[Modified by Winging It, 11:31 PM 12/17/2003]
The Desktop Dyno is yours.
Header wrap is now gone.
And thanks to Budman78 & NOTHIN'LIKE'A'69 for offering to join in. I've got a couple of nice things that I will add tomorrow and a few nik-naks to those who are just looking for missing parts to C-3's.
[Modified by Winging It, 11:31 PM 12/17/2003]
Drifting
Joined: Feb 2003
Posts: 1,461
Likes: 2
From: Allen TX
Re: Christmas *FREEBIE* thread... (SlixVett)
O.K. I'm in:
I'll throw in my slightly used copy of "Corvette Weekend Projects - Maintenance and Repair How-Tos for 1968-1982 Corvettes" by John Pfanstiehl. Great book for basic repairs or Vette newbies.
Who wants it?
I'll throw in my slightly used copy of "Corvette Weekend Projects - Maintenance and Repair How-Tos for 1968-1982 Corvettes" by John Pfanstiehl. Great book for basic repairs or Vette newbies.
Who wants it?
Ooooo, I'll take the Corvette Weekend Projects book!!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Safety Car
Joined: Jun 2002
Posts: 4,844
Likes: 0
From: Pearland TX
St. Jude Contributor
Re: Christmas *FREEBIE* thread... (Shrike)
Header wrap goes to Shrike.
As an end to the night. Is anyone missing some emblems on their C-3? All were taken off my '71 and need repainting. All tabs are intact and they are in good shape. Offered are:
Item #5
1) Front Cross Flags
2) Gas Cover Cross Flags
3) 2 Sets - 4-5-4 Hood
(Emblems claimed by NHvette) No longer available
[Modified by Winging It, 9:57 AM 12/18/2003]
As an end to the night. Is anyone missing some emblems on their C-3? All were taken off my '71 and need repainting. All tabs are intact and they are in good shape. Offered are:
Item #5
1) Front Cross Flags
2) Gas Cover Cross Flags
3) 2 Sets - 4-5-4 Hood
(Emblems claimed by NHvette) No longer available
[Modified by Winging It, 9:57 AM 12/18/2003]
Racer
Joined: Sep 2002
Posts: 389
Likes: 0
From: san diego ca
Re: Christmas *FREEBIE* thread... (Shrike)
I'll take the header wrap, my '69 has a fiberglass spring and I was planning on doing that next month.
My hat is off to ya!
:cheers:
My hat is off to ya!
:cheers:
Thanks!
Le Mans Master
Joined: Jun 2002
Posts: 8,339
Likes: 24
From: I can walk to MA
Re: Christmas *FREEBIE* thread... (Winging It)
Ooh !!!! I could use the emblems ... that is if you don't mind seeing them
later on the nose/gas cover of my 75/70 hybrid.
I don't NEED the 454 emblems, although I would like to step up to a 454
in a year or two.
Lemme know ... I'll be in the garage looking for some goodies to offer up, too.
I know I have some 68 side markers that I bought by mistake ... and maybe a tail lens or two.
Thanks,
-Dave :seeya
[Modified by NHvette, 9:49 AM 12/18/2003]
[Modified by NHvette, 9:49 AM 12/18/2003]
Drifting
Joined: Sep 2003
Posts: 1,325
Likes: 6
From: FRANKLIN GA
Re: Christmas *FREEBIE* thread... (Winging It)
You know it takes someone with a really big heart to do something so generous. You my friend definitly understand the TRUE meaning of Christmas.
Bravo!!!
:cheers: :hurray: :hurray: :hurray:
Bravo!!!
:cheers: :hurray: :hurray: :hurray:
Intermediate
Joined: Dec 2003
Posts: 31
Likes: 0
From: Cedar Park TX
St. Jude Contributor
Re: Christmas *FREEBIE* thread... (Winging It)
What a great idea!!!
Being new at this (Only being an owner for two months), I don't have a ton of parts, but I did replace the shocks right after I bought the car. They didn't help, so I'm putting one of the street/slalom kits on this weekend. I won't need the shocks I bought, so if anybody needs a set of shocks with maybe 500 miles on them, I'll be glad to send them. They're just Monroe replacements, but they ARE almost new. Otherwise, they'll sit in my garage for approximately three decades and I'll finally just throw them away.
Gone to docmow...Merry Christmas, y'all!!!
[Modified by VietNam_Vette, 9:49 AM 12/18/2003]
Being new at this (Only being an owner for two months), I don't have a ton of parts, but I did replace the shocks right after I bought the car. They didn't help, so I'm putting one of the street/slalom kits on this weekend. I won't need the shocks I bought, so if anybody needs a set of shocks with maybe 500 miles on them, I'll be glad to send them. They're just Monroe replacements, but they ARE almost new. Otherwise, they'll sit in my garage for approximately three decades and I'll finally just throw them away.
Gone to docmow...Merry Christmas, y'all!!!
[Modified by VietNam_Vette, 9:49 AM 12/18/2003]
Melting Slicks
Joined: Nov 2001
Posts: 2,659
Likes: 7
From: Katy (Houston) TX
CI 7-8 Veteran
Re: Christmas *FREEBIE* thread... (Winging It)
I don't care what they say about you Barry (Winging It), you're a good guy. :lol:
HAPPY HOLIDAYS to you and the rest of this great forum!!!!
:hat
HAPPY HOLIDAYS to you and the rest of this great forum!!!!
:hat