Van Steel

74droptop
You should have 2 poly bushings and 1 sleeve per arm. Call me up and I'll send you some.

Van Steel

foundvettelifeisgood
Shipping from the zip code you have on your sig, it should cost you about $45 to ship both back. I would reuse the boxes I sent you. Yes I can install your poly bushing at no extra charge. Our turn around time is normally 3-5 days. Now that we've been getting a very good response to this thread the turn around time is about 5-7 days. You can give me a call and I'll write you up and get you going.

Van Steel

PyjamaSam
All of our rebuilt parts are bolt on parts. You take it out of the box and put it on your car. Normally we give a month for the cores to return. If you need longer let me know and we'll work with you. If you purchase a poly rebuild kit and you want us to install the poly bushings thats perfectly fine and there is no additional cost.

Van Steel

79Fever
This offer is good until March 31st. We realize that not everyone can do this right away so we are giving people a little bit of time.

We have boxes made for us and the t-arms have foam packed around them.

Van Steel

If anyone sent me an IM and did not receive a message back, please resend it. My computer went offline and I lost some of the IM's

74droptop

Thanks I'll be contacting you.

82X-FireVette

Dan,

I need left (drivers side) complete stock rebuilt trailing arm for 1982 automatic. Got one? I can bring the core to your shop and pick up the replacement. Please respond to this address: Bob.Bessette@Disney.com. Thanks.
:chevy

Van Steel

82X
You have mail.

Marks69BB

Is the e-brake linkage mounted the same on the offsets as on the stock ones or is it relocated?

I'm very interested in a complete offset pair for my 69!

Post here, email or IM me. Thx

Van Steel

E-brake bracket is mounted on top of the t-arm. Here's a pic of the offset t-arm with my 30 spline axels.





[Modified by Van Steel, 1:34 PM 2/11/2004]

Red69

Hey Dan,

Are the spindels and roters made in the US :flag or are they from over seas :nono: ?

Thanks

Van Steel

US

grayhook

hay dan is that core charge of $300 for both or is that each?

Van Steel

per side

grayhook

Complete Offset T-arms
Regular Price is $1169.97 core $600/$300 per side
Forum Price is $ 990.00 core $390/$195 per side
total $1380 forum price

Complete T-Arm Assemblies
Regular price is $389.99 per side core $300
Forum price is $330.00 per side core $300
total $1260 forum price

$140 to add offset T-Arms
:skep: :skep: :skep:

Bare Offset T-Arms
Regular Price is $389.99 for the set (L & R)
Forum Price is $330.00 for the set (L & R)

this dont add up.... :skep: :skep:
offset core $195 per side and same core not offset $300 per side?

:skep: :skep: :skep: :skep:

Van Steel

b/c if you get offsets, we don't care if we get your orginal arms or not. If you want to pay a higher core thats fine w/me :D

grayhook

ok cool with me, just did'nt look right.... :crazy:
be place'n my order soon!!
thank for strating me out :D
and keep up the good work
:flag

hermit

OK. I'm liking this sale but I am looking for a different combination. If I'm going to do it I might as well do it right the first time. What I was thinking about is the offset trailing arms. I'm waffling between the single and double. I like the idea of the extra 1" clearance to the spring end on the double. Do you sell the narrower spring to go with them? Will the sway bar be a clearance issue? I would also like the high performance half shafts and axle kit. I'm thinking of upgrading to the 12 bolt diff (Tom's Differentials). Are these axles compatible with that modification? I want slotted and cross drilled rotors (mostly for looks) so I would not need the rotors unless you have a source for those also. Do you think you can come up with a package for me?

Van Steel

Hermit
I think we'll be abl to work something out. Is this the kit you are talking about.


http://www.vansteel.com/index.cfm?fu...&SubGroup=1878

Yes I do have shortened springs. You can run a rear sway bar w/it but it depends on the size tire you choose. I do have slotted rotor but we do not carry drilled rotors. Also w/this 30 spline kit. If you can wait a couple of months, Tom and I are working on making the 1/2 shafts out of carbon fiber w/the aluminum ends. Right now those shafts wiegh 20 pounds each and you will be able to save a lot of weight by going to the carbon. He's having the ends made and I'm making the shafts. He will test them out on his cars.

Right now I'm in Houston doing the Corvettes at Houston show. I will return on the 25th. You can call me than if you would like to, to talk about everything.

Dan

hermit

Yes, that is the setup I was looking at. If you are working with the folks at Toms differentials I'm looking foreward to what you come up with. I imagine the final product should be pretty bulletproof. Don't you alreadt offer a cf half shaft? Seems like I have seen something about them. I'll be waiting to see what you can do but I don't want to miss out on the special pricing on the offsets.