Need help with initial start up
Thread Starter
Racer
Joined: Sep 2001
Posts: 267
Likes: 0
From: Midland TX
Need help with initial start up
Help guys,
I am starting the motor for the first time since the restoration. It keeps back firing through the carb and starting a fire!!! :eek:
It turned on once with alot of pumping on the throttle. Am I running too rich or too much timing. :confused:
I am starting the motor for the first time since the restoration. It keeps back firing through the carb and starting a fire!!! :eek:
It turned on once with alot of pumping on the throttle. Am I running too rich or too much timing. :confused:
Senior Member since 1492
Joined: Aug 2000
Posts: 87,915
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Re: Need help with initial start up (enforcer)
Could your distributor be 180 off?? :confused:
Got any pics of that BB??
Got any pics of that BB??
Thread Starter
Racer
Joined: Sep 2001
Posts: 267
Likes: 0
From: Midland TX
Re: Need help with initial start up (Obdoc)
It started!!! :party:
I had the distributor too retarded, I just had to give it alittle more initial advance and it fired right up. :hurray:
[Modified by Obdoc, 12:39 PM 3/6/2004]
I had the distributor too retarded, I just had to give it alittle more initial advance and it fired right up. :hurray:
[Modified by Obdoc, 12:39 PM 3/6/2004]
Instructor
Joined: Mar 2003
Posts: 135
Likes: 0
From: Fort McMurray Albetrta
Re: Need help with initial start up (81' Corvette Guy)
Glad to hear you got it going. I just started mine up today too and had the timming out 180 degres, a quick fix and up she came. Have to say that it is a bit hard on the nerves when she don't fire right away. I then did the 20min cam break-in and all went well. The 383 shure sounds nice, now to get to work on painting it.
:cheers:
:cheers:
