Steering box rebuild
Thread Starter
Instructor
Joined: Nov 2003
Posts: 177
Likes: 0
From: Rockingham NC
Re: Steering box rebuild (gtr1999)
I rebuilt it with a Van Steel kit and the shim is not thick enough and it seems to have more play than before....not sure what the @#$% i did wrong.
Advanced
Joined: Feb 2004
Posts: 63
Likes: 0
From: Elverson pa
Re: Steering box rebuild (gtr1999)
I just noticed that Flaming River sells a rebuild kit - I don't know price (or anything else about it) - http://www.flamingriver.com lists it though.
Ray
Ray
Thread Starter
Instructor
Joined: Nov 2003
Posts: 177
Likes: 0
From: Rockingham NC
Re: Steering box rebuild (brs6482)
New update on steering box....
1) Thanks for all the input and offers here (Gary)
2) I had called Van Steel today on a seperate issue and he mentioned he saw on the Forum i was having trouble with my Kit/box. I told them it wasnt the kit but that it was more me and my lack of knowledge on this issue. Well i was transfered to the tech guy who diagnosed my problem right off and walked me through the entire rebuild process. So my hat is off to VAN Steel. Great to have a vendor on here who actually monitors the forum. Definately my #1 vendor now
PS The problem was the worm gear in backwards...... :conehead
1) Thanks for all the input and offers here (Gary)
2) I had called Van Steel today on a seperate issue and he mentioned he saw on the Forum i was having trouble with my Kit/box. I told them it wasnt the kit but that it was more me and my lack of knowledge on this issue. Well i was transfered to the tech guy who diagnosed my problem right off and walked me through the entire rebuild process. So my hat is off to VAN Steel. Great to have a vendor on here who actually monitors the forum. Definately my #1 vendor now
PS The problem was the worm gear in backwards...... :conehead
Tech Contributor
Joined: Aug 1999
Posts: 15,135
Likes: 3,939
From: Connecticut, USA
Re: Steering box rebuild (brs6482)
Ray,
Glad you got the box corrected. As you now know, the worm nut only goes in one way-it will fit both ways but only one works. The teeth for the rack are angle cut so they mesh with the pitman arm and can be adjusted. You also have to be sure you have 27 ball bearings in each circuit to avoid any backlash in the screw.
:thumbs:
Gary
Glad you got the box corrected. As you now know, the worm nut only goes in one way-it will fit both ways but only one works. The teeth for the rack are angle cut so they mesh with the pitman arm and can be adjusted. You also have to be sure you have 27 ball bearings in each circuit to avoid any backlash in the screw.
:thumbs:
Gary
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
