Help me mount my sub box
Mar 18, 2004 | 05:03 PM
Thread Starter
Drifting
Joined: Mar 2001
Posts: 1,600
Likes: 0
From: Valencia (near LA) CA
Help me mount my sub box
I built this sub box, it sounds great, fits well, but I don't know how to bolt it down.
I know that the gas tank is behind the back wall so I need to be careful there, but I have no clue as to the best way to secure it.
Any Ideas?
Thanks,
~Jay
Mar 18, 2004 | 05:07 PM
Le Mans Master
Joined: Jun 2003
Posts: 5,135
Likes: 71
From: Umeå Sweden
Re: Help me mount my sub box (Jay M)
i screwed mine in the floor with some short screws it sits wery well.
its nothing thats gonna show if the box is removed.
:smash: :chevy
Mar 18, 2004 | 05:50 PM
Thread Starter
Drifting
Joined: Mar 2001
Posts: 1,600
Likes: 0
From: Valencia (near LA) CA
Re: Help me mount my sub box (stingraymaniac)
Because it is taller than it is deep, I also need to secure the top. Do you think the fiber glass is strong enough to hold a screw?
~Jay
Mar 18, 2004 | 05:51 PM
Race Director
Joined: May 2003
Posts: 11,814
Likes: 9
From: Science Bitch! Mississauga, Ontario
Canadian Events Coordinator
Re: Help me mount my sub box (stingraymaniac)
Quote:
i screwed mine in the floor with some short screws it sits wery well.
its nothing thats gonna show if the box is removed.
:smash: :chevy
:iagree:
Mar 18, 2004 | 06:05 PM
Race Director
Joined: Dec 1999
Posts: 16,945
Likes: 9
Re: Help me mount my sub box (Jay M)
Find the plugged jig holes on the rear floor, pop the plugs out so you have hole to secure it through, use big washers as not to crack the fiberglass
Mar 18, 2004 | 07:00 PM
Racer
Joined: Jan 2004
Posts: 288
Likes: 0
From: ft. lauderdale florida
Re: Help me mount my sub box (Jay M)
I through bolted mine, 4 bolts and very big fender washers into the floor.... :jester
Mar 18, 2004 | 09:08 PM
Melting Slicks
Joined: Jan 2003
Posts: 2,804
Likes: 1
From: OKC Oklahoma
Re: Help me mount my sub box (Jay M)
Bungy cord it to the back deck.... :D