Requesting good source - new calipers
Thread Starter
Intermediate
Joined: Jan 2003
Posts: 36
Likes: 0
From: west chester pa
Requesting good source - new calipers
Hi,
I have a '70 LS5 with the original calipers and would like to replace the fronts with the updated stainless steel sleeved design.
Could someone please recommend a good source for these (in terms of good quality/best price)?
Thanks very much, I appreciate any advice!
John
I have a '70 LS5 with the original calipers and would like to replace the fronts with the updated stainless steel sleeved design.
Could someone please recommend a good source for these (in terms of good quality/best price)?
Thanks very much, I appreciate any advice!
John
Burning Brakes
Joined: Nov 2002
Posts: 930
Likes: 1
From: Phoenix Az
Re: Requesting good source - new calipers (jrs420454)
I bought mine from Vette Brakes & Products. Went the NEW route,didn't want to mess with core exchange. Around $500.00 for all 4. :cheers: :seeya
Drifting
Joined: May 2001
Posts: 1,651
Likes: 13
From: Holly MI
Re: Requesting good source - new calipers (jrs420454)
Welcome to the forum. Try looking at some of the sponsoring vendors here on the forum. If you don't see what you are looking for, try http://www.calipersonline.com. Rebuilt Delco calipers for $47 plus $40 core. I have 6 of his calipers between my Vette and Camaro and am very happy.
Ken
Ken
Drifting
Joined: Aug 2003
Posts: 1,327
Likes: 16
From: Fl
Re: Requesting good source - new calipers (jrs420454)
John,
I had a local shop re-sleeve my original ones. Not to big of a deal if you find a guy/shop that knows Vette brakes. Price was reasonable - bit less expensive than buying 4 new ones ...
Is the 420 next to the 454 the horse power, or is there some greater significance ??
:)
Bill
I had a local shop re-sleeve my original ones. Not to big of a deal if you find a guy/shop that knows Vette brakes. Price was reasonable - bit less expensive than buying 4 new ones ...
Is the 420 next to the 454 the horse power, or is there some greater significance ??
:)
Bill
Thread Starter
Intermediate
Joined: Jan 2003
Posts: 36
Likes: 0
From: west chester pa
Re: Requesting good source - new calipers (72ls5fla)
Thanks for the advice guys!
Bill, the Vette's original (390 hp). The 420 refers to my daily driver, a '97 E420. While it's a little more comfortable, it sure feels slow in comparison!
Bill, the Vette's original (390 hp). The 420 refers to my daily driver, a '97 E420. While it's a little more comfortable, it sure feels slow in comparison!
Melting Slicks
Joined: Nov 1999
Posts: 2,460
Likes: 352
From: Madison Alabama
Re: Requesting good source - new calipers (jrs420454)
For what it's worth I just replaced both rear calipers on my '82 this weekend. I bought the replacement calipers at AutoZone. I wanted to avoid downtime and since they had them in stock I was able to be back in the road in short time.
Price was right as well, $50 each with a $38 core charge. They have a life-time warranty and are stainless steel sleeved. In fact, I had a leaking piston seal on one of the new ones that they exchanged without question...took me forever to find the leak, thought I had left a bleed screw open or not seated the brake line right...who would've thought it was new equipment error and not user error! :smash:
I decided to keep my original calipers and suck up the core charge. This way I have my original calipers that I will rebuild at a later date should I decide to have her judged.
If you decide to go the AutoZone route, call ahead and make sure they have a few in stock so that you can look them over and select ones that are Delco. They may be rebuilt but at least they will be correct in appearance (the "Delco Moraine" logo is visible through slots in the wheels on my '82)
Price was right as well, $50 each with a $38 core charge. They have a life-time warranty and are stainless steel sleeved. In fact, I had a leaking piston seal on one of the new ones that they exchanged without question...took me forever to find the leak, thought I had left a bleed screw open or not seated the brake line right...who would've thought it was new equipment error and not user error! :smash:
I decided to keep my original calipers and suck up the core charge. This way I have my original calipers that I will rebuild at a later date should I decide to have her judged.
If you decide to go the AutoZone route, call ahead and make sure they have a few in stock so that you can look them over and select ones that are Delco. They may be rebuilt but at least they will be correct in appearance (the "Delco Moraine" logo is visible through slots in the wheels on my '82)
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Instructor
Joined: Sep 2003
Posts: 119
Likes: 1
From: Part breakage is just weakness leaving my Stingray
Re: Requesting good source - new calipers (jrs420454)
for a couple grand you can get aluminum calipers from stainless steel brake company. http://www.ssbrakes.com
Thread Starter
Intermediate
Joined: Jan 2003
Posts: 36
Likes: 0
From: west chester pa
Re: Requesting good source - new calipers (72ls5fla)
Thanks for the advice guys!
Bill, the Vette's original (390 hp). The 420 refers to my daily driver, a '97 E420. While it's a little more comfortable, it sure feels slow in comparison!
Bill, the Vette's original (390 hp). The 420 refers to my daily driver, a '97 E420. While it's a little more comfortable, it sure feels slow in comparison!
Le Mans Master
Joined: Sep 2000
Posts: 5,635
Likes: 4
From: Orlando Floriduh
Re: Requesting good source - new calipers (jrs420454)
beware..There is a crook who sells stuff on line from Del Ray beach FL. He has been around for years under various names but the result is always the same. Inferior products like repainted used caliper that have not been sleeved even though that's how he represents them
s how he repr. double charges on you credit card.. You name it :nonod:
[Modified by bluevetteman, 3:52 PM 3/30/2004]
s how he repr. double charges on you credit card.. You name it :nonod:
[Modified by bluevetteman, 3:52 PM 3/30/2004]
