When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Congrats Olivier! :party: When do you race next and will it be at Moroso? If not then where?
I might not race again before Fall.. I have a new drivetrain/powertrain going in this summer... I already have buyers for all my current components and don't want to break anything until the parts will come out.. When the new drivetrain/powertrain is in - I will race the car at Moroso...
I might not race again before Fall.. I have a new drivetrain/powertrain going in this summer... I already have buyers for all my current components and don't want to break anything until the parts will come out.. When the new drivetrain/powertrain is in - I will race the car at Moroso...
Any hints on what is to come. Looking to get into the 10s :jester
I might not race again before Fall.. I have a new drivetrain/powertrain going in this summer... I already have buyers for all my current components and don't want to break anything until the parts will come out.. When the new drivetrain/powertrain is in - I will race the car at Moroso...
Any hints on what is to come. Looking to get into the 10s :jester
406 or 427 small block with solid roller cam (approx. .670 lift with 1.6 roller rockers and 264/270 degrees duration @ .050).
Fully forged bottom end and Dart Pro 1 230cc heads - fully ported and matched to 1206 gasket... Estimated HP output: 600 - 625 HP..
TH700R4 transmission - fully manual valvebody and reversed shift pattern with transbrake. Ford 9 inch rear end with 4-link setup...
Hope for mid 10's in winter and upper 10's in summer..