Looking Four Unique Mod Ideas
Thread Starter
Team Owner
Joined: Dec 1999
Posts: 26,555
Likes: 257
From: Florida
2021 C2 of the Year Finalist - Modified
C2 of the Year Finalist - Modified 2020
C2 of Year Finalist (performance mods) 2019
St. Jude Donor '03 thru '26
Looking Four Unique Mod Ideas
What mod do you have that you consider rare or unusual? :)
EDIT: Four meaning For!
[Modified by OHSIXX, 8:16 PM 5/16/2004]
EDIT: Four meaning For!
[Modified by OHSIXX, 8:16 PM 5/16/2004]
Safety Car
Joined: Nov 2002
Posts: 4,182
Likes: 1,178
From: out of nowhere
Re: Looking Four Unique Mod Ideas (OHSIXX)
My headlights are a little different than what most do. Theyre small enough (74' Datsun) that I'll be able to install the flat plexi covers instead of the Guldtrand "bubbles". I've removed the front grills and fabricated brackets to hold little yellow fog lights. These will act as running lights. I want to be able to look into the front and see the aluminum radiator, AN fittings and stainless hoses (kind of like a Cobra). I've never seen my wheels on another Vette. They arwe also kind of like a Cobra's. I'm also having aluminum door panels made that will be swiss cheesed, then polished to match my Kirkey "ultra lite" seats. I'm installing a Hairy Glass dash that will also have a polished & swiss cheased insert. The center console will be pretty unique too. Hard to explain that one, but I'll post pics when I get there. :cheers:
[Modified by litevette, 7:37 PM 5/16/2004]
[Modified by litevette, 7:37 PM 5/16/2004]
Drifting
Joined: Nov 2003
Posts: 1,410
Likes: 0
From: chicago IL
Re: Looking Four Unique Mod Ideas (Red73)
Im about to replace my stock front end with a one piece tilt front end, and im going to fabricate my own tilting mechanism, then planning on putting the headlights UNDER the bumper, where the grilles would normally be. It should be one of the more unique vettes on the forum once its all done. So thats my unique mod :D :cool:
Team Owner
Joined: Jul 1999
Posts: 26,545
Likes: 46
From: Huntersville NC
Re: Looking Four Unique Mod Ideas (killervette666)
I have an upper radiator hose shield that is both rare and unusual. It is custom fabricated from a campbells chicken noodle soup can (label removed) wrapped in aluminum tape. It is both functional AND attractive! :yesnod:
Team Owner
Joined: Jul 1999
Posts: 65,492
Likes: 230
From: Orange Park Florida
Re: Looking Four Unique Mod Ideas (OHSIXX)
I suppose I have one of the longer lists of mods on the C3 forum here, but some of the specifics may not go as far as other folks in any one area....
the guy I"m mainly thinking of is Norval.....
see my site if it's still there....pix of everything modded,
not one stone untouched, except the windshield....
GENE
the guy I"m mainly thinking of is Norval.....
see my site if it's still there....pix of everything modded,
not one stone untouched, except the windshield....
GENE
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: May 2004
Posts: 11,920
Likes: 2
Re: Looking Four Unique Mod Ideas (mrvette)
Mrvette,
I have quite a long list myself....still trying to figure out how to post pics though.
Found my own little webspace, but have no idea as of yet how to upload to it.
All I know is right click on stuff and then look at the options....and one of the options does not say "send to my own little webspace" :D
I'll get there...yet :yesnod:
I have quite a long list myself....still trying to figure out how to post pics though.
Found my own little webspace, but have no idea as of yet how to upload to it.
All I know is right click on stuff and then look at the options....and one of the options does not say "send to my own little webspace" :D
I'll get there...yet :yesnod:
Team Owner
Joined: Jul 2001
Posts: 182,997
Likes: 88
From: Lakeland, FL
Cruise-In IV-V-VI-VII-VIII Veteran
St. Jude Donor '03, '06, '17
Re: Looking Four Unique Mod Ideas (OHSIXX)
chrome bumper tilt front
unique headlight setup
custom built spoiler (one of a kind)
unique headlight setup
custom built spoiler (one of a kind)
Race Director
Joined: Jan 2004
Posts: 18,398
Likes: 0
From: If the world didnt suck, we would all fall off. Troy,Ohio.
Cruise-In VI Veteran
St. Jude Donor '04-'05-'06-'07-'08
Re: Looking Four Unique Mod Ideas (GrandSportC3)
My POS. I wanted Chrome bumpers for it (the rear panel.) It just eats at me that it's going to be real hard to do. I'm going to order the filler panel tomorow and do this.
I wish I seen this post befor I offerd to part my PITA out.
The $450 427 will need some TLC lol a lot of TLC.
I just hope it's steel there tomorrow when I go get it.
I fixed 99% of the wiring to, The Dash harness is realy being a ****.
I wish I seen this post befor I offerd to part my PITA out.
The $450 427 will need some TLC lol a lot of TLC.
I just hope it's steel there tomorrow when I go get it.
I fixed 99% of the wiring to, The Dash harness is realy being a ****.
Instructor
Joined: May 2004
Posts: 123
Likes: 0
From: corpus christi tx
Re: Looking Four Unique Mod Ideas (OHSIXX)
finished, but not installed:
-aluminum headlight bar that mounts in the nose behind the front grill area that eliminates the pop-ups all together- saving about 20 lbs
-aluminum rad support that only weighs about 3 lbs
-aluminum vacuum tube that replaces the 45 lb unit in the front nose and itself weighs in at about 10 lbs (although i'm probably not going to mount it because i really don't need it since i don't have the pop-ups)
still working on:
-bracket that will eliminate the upper diff crossmember, purpose being weight savings and to make room for my coilover 6 link suspension
-carbon fiber interior panels-- i have all the material, just need to get the body back on the frame so i can do the fitting
-12 point cage (again waiting on dropping the body)
-aluminum headlight bar that mounts in the nose behind the front grill area that eliminates the pop-ups all together- saving about 20 lbs
-aluminum rad support that only weighs about 3 lbs
-aluminum vacuum tube that replaces the 45 lb unit in the front nose and itself weighs in at about 10 lbs (although i'm probably not going to mount it because i really don't need it since i don't have the pop-ups)
still working on:
-bracket that will eliminate the upper diff crossmember, purpose being weight savings and to make room for my coilover 6 link suspension
-carbon fiber interior panels-- i have all the material, just need to get the body back on the frame so i can do the fitting
-12 point cage (again waiting on dropping the body)
Race Director
Joined: Jun 2001
Posts: 16,483
Likes: 1
From: The Only Corvette in Gila Bend, Az.
St. Jude Donor '09
Re: Looking Four Unique Mod Ideas (Corey_68)
Don't tell anyone this, but my wife uses a cloths pin (wooden one no less) to hold the shoulder belt tension, that way it doesn't pull to hard all the time against her shoulder.
Pretty easy to duplicate, but I'll never admit to giving you the idea for it. :p:
Pretty easy to duplicate, but I'll never admit to giving you the idea for it. :p:
Race Director
Joined: Oct 2002
Posts: 12,065
Likes: 2
From: Smalltownville Michigan
Cruise-In 5, 6 & 10 Veteran
St. Jude Donor '09
Re: Looking Four Unique Mod Ideas (OHSIXX)
I know it's kinda bubba'ed but the person that owend my car before me put lights in the side vents of my 77 so that when you put the turn signal or flashers on, they light up... kinda like a clearance light... i think it looks pretty cool though....