Anyone need headlight system ?
Thread Starter
Instructor
Joined: Jul 2004
Posts: 179
Likes: 0
Anyone need These Items
I have the complete 1981 vette original rims with spinners , control arms ( upper and lower ) .
Also :
Z-28 Camaro
Brand new Rear window louvers,two sets of T-tops,Both Hood scoops off of 1992 Z-28 Camaro.
Also two Tune Port systems with computer off of a 1987 camaro with a 350 .
Have totally modified my 81 Vette with a 671 Blower and a VBP suspension system and will not need these items .
Havent completed the engine project but I sure hope everything works out . Have completly stripped the four times paint down to the fiberglass and have sealed it after some body work . So this baby will pull out of the driveway with lots of chrome and a nice urethane paint job .
If there is anyone needing such items , contact me at
keithclem60@aol.com .
Also :
Z-28 Camaro
Brand new Rear window louvers,two sets of T-tops,Both Hood scoops off of 1992 Z-28 Camaro.
Also two Tune Port systems with computer off of a 1987 camaro with a 350 .
Have totally modified my 81 Vette with a 671 Blower and a VBP suspension system and will not need these items .
Havent completed the engine project but I sure hope everything works out . Have completly stripped the four times paint down to the fiberglass and have sealed it after some body work . So this baby will pull out of the driveway with lots of chrome and a nice urethane paint job .
If there is anyone needing such items , contact me at
keithclem60@aol.com .
Last edited by 81VetteFreak; Sep 2, 2004 at 04:26 PM.
Racer
Joined: Nov 2001
Posts: 478
Likes: 3
From: Huntsville AL
I could use some spares for my 81 
, let me know if you still have them and maybe I could take a road trip to pick them up 
I'm just down the road in Huntsville, AL. Let me know if you still have them.
YBnormal...drive a vette
swhite7@bellsouth.net
, let me know if you still have them and maybe I could take a road trip to pick them up I'm just down the road in Huntsville, AL. Let me know if you still have them.YBnormal...drive a vette
swhite7@bellsouth.net
Thread Starter
Instructor
Joined: Jul 2004
Posts: 179
Likes: 0
$ 400 includes :
ECM Computer
One intake
Two sets of tubes
Two Plantums
Two Throttle bodies
One set of injectors
One of the sets of tubes and one of the plantums have been started on by polishing .
All is a package and will not be parted out .
ECM Computer
One intake
Two sets of tubes
Two Plantums
Two Throttle bodies
One set of injectors
One of the sets of tubes and one of the plantums have been started on by polishing .
All is a package and will not be parted out .
Last edited by 81VetteFreak; Sep 22, 2004 at 11:12 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski