69 BB side exhaust
Team Owner
Joined: Feb 2003
Posts: 30,183
Likes: 313
From: Lake Norman NC
Originally Posted by Jughead
Wow! $1,000! Anyone using these BB headers?
Instructor
Joined: Apr 2004
Posts: 106
Likes: 0
From: Norfolk VA
Don't know if they do side exhaust but you may want to check Stans out. http://www.stans-headers.com/
Thread Starter
Pro
Joined: Jan 2002
Posts: 695
Likes: 0
From: Ashley Michigan
hey redshark, do you still have these pics? or does anyone have pics of a stahl setup? or any setup for that matter. I've wanted headers since I've got the car, and may have the money soon here, after I sell one of my cars...
Team Owner
Joined: Feb 2003
Posts: 30,183
Likes: 313
From: Lake Norman NC
Originally Posted by bbeck
hey redshark, do you still have these pics? or does anyone have pics of a stahl setup? or any setup for that matter. I've wanted headers since I've got the car, and may have the money soon here, after I sell one of my cars...
Instructor
Joined: May 2001
Posts: 228
Likes: 0
From: Santa Cruz CA
I have the Stahls. You can get with raised or std. port heads. Mine have 4" collectors, but I think you can get 3 1/2" collectors too. The fit and workmanship are first rate, but I don't think you will get stock covers over them.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Melting Slicks
Joined: Mar 2000
Posts: 3,206
Likes: 0
From: WANTED: '68 rear valance with b/u light assemblies IM, e-mail, or PM me here. Thanks!
Originally Posted by Jughead
Stock '69 exhaust here and it's loud.
Next step will be to try the C2 side exhaust insulators and covers. I heard you can get a 3 in pipe under there, where you can't on the '69 covers.
Next step will be to try the C2 side exhaust insulators and covers. I heard you can get a 3 in pipe under there, where you can't on the '69 covers.
C6 the C5 of tomorrow
Joined: Nov 2000
Posts: 6,665
Likes: 2
From: Twin Cities Minnesota
Originally Posted by 63Banshee
Under is a relative term in this case. I've seen 4" o.d. muffs "under" '69 covers, but they were partially visible while standing back from the car.
Melting Slicks
Joined: Mar 2000
Posts: 3,206
Likes: 0
From: WANTED: '68 rear valance with b/u light assemblies IM, e-mail, or PM me here. Thanks!
Originally Posted by 427V8
Stock mufflers are also visable under the covers...
Thread Starter
Pro
Joined: Jan 2002
Posts: 695
Likes: 0
From: Ashley Michigan
jughead, yours are the stock mufflers and manifolds, correct? I wonder if mine hang that low. Nobody ever sees it when it's on the ground anyway... Are there any pictures out there of aftermarket?
Le Mans Master
Joined: Jun 2002
Posts: 8,339
Likes: 24
From: I can walk to MA
I had a nice set of pictures showing the Hedman side exhaust
headers on a SB. My home PC drive crashed. If I get them back
soon, I will send them off.
ps - The nicely built 350 that they went onto showed a noticable gain (no numbers). They go to stock 69 mufflers that have since rotted out the baffles.
headers on a SB. My home PC drive crashed. If I get them back
soon, I will send them off.
ps - The nicely built 350 that they went onto showed a noticable gain (no numbers). They go to stock 69 mufflers that have since rotted out the baffles.
Senior Member since 1492
Joined: Aug 2000
Posts: 87,922
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Originally Posted by bbeck
jughead, yours are the stock mufflers and manifolds, correct? I wonder if mine hang that low. Nobody ever sees it when it's on the ground anyway... Are there any pictures out there of aftermarket?
Yeah, they're the stock pipes. I can see them from the side though. gotta watch to not burn my foot when the engine is running and I'm working on the carb.
3.5 inches of clearance at the front of the pipe.
Melting Slicks
Joined: Nov 2003
Posts: 2,668
Likes: 119
From: St. Charles Mo
CI 5 & 8 Veteran
Originally Posted by bbeck
jughead, yours are the stock mufflers and manifolds, correct? I wonder if mine hang that low. Nobody ever sees it when it's on the ground anyway... Are there any pictures out there of aftermarket?
