clock question??
Thread Starter
Burning Brakes
Joined: Aug 2004
Posts: 914
Likes: 0
From: Longview Texas
clock question??
ok, the clock is out ... while removing other stuff .. old alarm systems (2) and replacing speakers...... and I need to know if you hook a positive 12v to the center pole of the clock and ground the rest of the clock (12v neg) should the clock work? oh, 77 basically stock ....Thanks..Robert 
Thread Starter
Burning Brakes
Joined: Aug 2004
Posts: 914
Likes: 0
From: Longview Texas
OK, used that wonderful tech article and now my clock is working 
, well the previous owner ...... or someone........ had tightened the one nut on the back too tight and the round plastic thing was cracked. I though it would hold together but as I was tightening the nut ....... 
spang ........into about 5 pieces ...... trying to glue back together 
but not much luck ....anyone have an old clock they want to sell ? will also post in parts needed forum . ......Thanks ...... Robert
, well the previous owner ...... or someone........ had tightened the one nut on the back too tight and the round plastic thing was cracked. I though it would hold together but as I was tightening the nut ....... spang ........into about 5 pieces ...... trying to glue back together but not much luck ....anyone have an old clock they want to sell ? will also post in parts needed forum . ......Thanks ...... Robert
Race Director
Joined: Apr 1999
Posts: 11,520
Likes: 13
From: CORVETTE 77 385 C.I. TEXAS
....anyone have an old clock they want to sell ? will also post in parts needed forum . ......Thanks ...... Robert
Have a 77 clock, was working when removed. What's it worth to you?
Thread Starter
Burning Brakes
Joined: Aug 2004
Posts: 914
Likes: 0
From: Longview Texas
Originally Posted by Ganey
Robert
Have a 77 clock, was working when removed. What's it worth to you?
Have a 77 clock, was working when removed. What's it worth to you?
