XE262 vs XE284
Thread Starter
Melting Slicks
Joined: Aug 2003
Posts: 2,135
Likes: 2
From: Dayton Oh
XE262 vs XE284
I'm currently running a CompCam XE262 on my 355, 9.7:1CR, Dart 180heads. I have lots of torque and vacuum. Anyone using the XE284 and would I see any noticable improvements?
Melting Slicks
Joined: Jun 2002
Posts: 2,844
Likes: 99
From: Orrtanna Pa.
I run a Comp XE-284 in my 406 and it shakes the fenders at idle.Works well for my combination,but I think in a 350 it would be too big.Now if you run a stick, and have strong rear gears and don't mind a pro stock idle,it'll be just fine.
Instructor
Joined: Nov 2004
Posts: 194
Likes: 0
From: Appleton Wi.
I'm running a similar combo, 355, 184 G.M. Phase II heads, 9.6:1 compression, Air Gap manifold, and a crane 274 cam, under a q-jet, with a 4-speed. I'm wondering what you consider alot of vaccum. Mine is at about 14 at 800 r.p.m.
TJ
TJ
