'96 Collector
Thread Starter
Advanced
Joined: Oct 2005
Posts: 99
Likes: 0
From: Shreveport Louisiana
'96 Collector
I am rebuilding (maybe) a rough '96 Collector. Do you have to remove the radiator to remove the alternator/AC compressor bracket? The bracket is broken & must be replaced. I got the alternator off & disconnected the compressor, but I am apparently not finding all the bolts holding the bracket on.
I just found "Figure 5-Pump and Brackets Installation" on page 3B-9 of my Service Manual. It still appears that (given the tight space) the radiator should come out. Any comments (even negative ones) are welcome.
I just found "Figure 5-Pump and Brackets Installation" on page 3B-9 of my Service Manual. It still appears that (given the tight space) the radiator should come out. Any comments (even negative ones) are welcome.
