C4 Logo?
Thread Starter
Advanced
Joined: Jun 2006
Posts: 97
Likes: 0
From: Springfield VA
C4 Logo?
Hello, I will try and do the best I can to explain what I asking about, because it is a little hard to picture.
I recently installed a new stereo system and I have a sub in the hatch, right next to the sub box is a custom box that I built. The custom box houses the amplifier and the capacitor, however one of the walls of the custom box is naked with nothing mounted there.
I would like to find a C4 logo that is around 10"x10" that I could mount right onto the box for a customized look. I tried to find the embroidery pattern to sew it on, but no luck. Thanks in advance for any ideas...
I recently installed a new stereo system and I have a sub in the hatch, right next to the sub box is a custom box that I built. The custom box houses the amplifier and the capacitor, however one of the walls of the custom box is naked with nothing mounted there.
I would like to find a C4 logo that is around 10"x10" that I could mount right onto the box for a customized look. I tried to find the embroidery pattern to sew it on, but no luck. Thanks in advance for any ideas...
Burning Brakes
Joined: Jun 2002
Posts: 1,001
Likes: 1
From: sd
Go to a graphics shop that makes stickers with your idea. There has to be something in your neck of the woods. You might be surprised what they can do. Good idea....let us know how it turns out with pics when done.
Team Owner
Joined: Jun 2001
Posts: 26,196
Likes: 0
From: Orlando FL
St. Jude Donor '08-'09
Might be hard to find a graphics shop with any GM logos anymore... I dont know about these days, but the shop we had in our warehouse a few years back, GM pulled all licensed logos from the logo books 
its hard to find any Corvette of other chevy (or any GM) logos these days that can be commercially reproduced.
its hard to find any Corvette of other chevy (or any GM) logos these days that can be commercially reproduced.
Drifting
Joined: Apr 2002
Posts: 1,817
Likes: 1
From: Hartland WI
I have a coule of pic files with C4 logos that I was going to take to an embroidery shop to do a similar thing. I think were talking about $100 or so to convert the pic into an embroidery file. Send me an e-mail to rstackjd@yahoo.com and I'll send them to you.
As long as this is for personal use only I don't believe you are violating GM's intellectual property rights, but don't even think about trying to make multiple sets for resale - they'll getcha
As long as this is for personal use only I don't believe you are violating GM's intellectual property rights, but don't even think about trying to make multiple sets for resale - they'll getcha
Team Owner
Joined: Jan 2006
Posts: 26,598
Likes: 0
From: Hampton, VA Yea, i'm a redneck... but you love it
Cruise-In 8-9 Veteran
aka/Trunk Monkey/Banned For Life/Corvette For Life
Originally Posted by jodyeastman
I have a CAD file of the C4 logo that I did up for my homepage. Any graphics artist should be able to convert this to a postscript type file needed for what you are looking for.
Racer
Joined: Oct 2002
Posts: 494
Likes: 0
From: Victoria BC
Originally Posted by Corvette for life
is that where you did the tire in your avatiar? i also use CAD and inventor, do you do it profesionally?
Yeah, I used Rhino3D for my tire in the avatiar. I am a naval architect so I use a variety of 3D softwares profesionally.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer